| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic Please help me date my new Ricky
Reply to topic
Author Topic:  Please help me date my new Ricky
basilh


From:
United Kingdom
Post  Posted 19 Nov 2005 2:25 pm    
Reply with quote

Please help me with a date for this guitar I just came by..
the serial number on the top of the headstock is
....C702...










Thanks in advance..
Baz
View user's profile Send private message Send e-mail Visit poster's website
Mike D

 

From:
Phx, Az
Post  Posted 19 Nov 2005 2:41 pm    
Reply with quote

Hey Ricky you're so fine, you're so fine you blow my mind, hey Ricky! Yeah, yeah, hey Ricky!

Sorry, don't know where that camn from.



------------------
Half-assed bottleneck and lap slide player. Full-assed Builder of resonator instruments.
View user's profile Send private message Send e-mail
Richard Shatz


From:
St. Louis
Post  Posted 19 Nov 2005 2:56 pm    
Reply with quote

That's one of the earliest ones, 1935-36.
It even has the very rare original tuner buttons. Be careful they tend to crumble. If you will be playing it, you should consider removing those tuners and replacing them with new vintage style machines.
Those are truly great instruments.
Enjoy.
View user's profile Send private message
Andy Sandoval


From:
Bakersfield, California, USA
Post  Posted 19 Nov 2005 4:38 pm    
Reply with quote

Beautiful guitar Baz, looks like one of the earliest models to me too, definitely "prewar"
View user's profile Send private message Send e-mail Visit poster's website
Ray Montee


From:
Portland, Oregon (deceased)
Post  Posted 19 Nov 2005 7:52 pm    
Reply with quote

Great lookin' guitar.........Congratulations.

Since they started production in July, 1935, with the single, octagon, volume knob, your photo's suggests it's an earlier model, however these were produced thro' 1937. By 1938, they had progressed to both tone and volume control knobs, both of which were of a new design as were the newer style fret marker.

You'll love its EASY TO PLAY personality. I have C-959 and then six more with much higher Serial numbers.

[This message was edited by Ray Montee on 19 November 2005 at 07:54 PM.]

View user's profile Send private message Send e-mail Visit poster's website
Jon Zimmerman

 

From:
California, USA
Post  Posted 19 Nov 2005 10:13 pm    
Reply with quote

Hi Baz: If the tiny covers on each end of the pickup, (where the curve of the horseshoe meets the body, with the thumbwheels on them) --are stamped 'pat pend'--its a mid 30s to 38 for sure. I've never seen another with these fret markers either, except in pictures of a trade show in the History of Rickenbacher Book.

[This message was edited by Jon Zimmerman on 19 November 2005 at 10:15 PM.]

..A book by Richard R Smith, out some years ago, you better get one, now that you have this early example, as a guide.
--can Google book search for it easily. JZ

[This message was edited by Jon Zimmerman on 19 November 2005 at 10:24 PM.]

View user's profile Send private message Send e-mail
basilh


From:
United Kingdom
Post  Posted 23 Nov 2005 12:37 pm    
Reply with quote

I'm puzzled.. the guitar body is stamped with the patent number NOT pat Pending .. Also under the thumb screws on the pick-up is the patent number..
But the guitar has only the volume control...
Could it be a combination of parts from different years ?

If its a 37-38, what's it worth ?
Baz
View user's profile Send private message Send e-mail Visit poster's website
Colin Brooks

 

Post  Posted 23 Nov 2005 2:30 pm    
Reply with quote

Basil. That is a pre 37 neck. It dosn't have the cut off corner at the end of the fingerboard like the later ones. I don't know a thing about those fret markers though. Judging by that low number you may well have a 35 or early 36 guitar with a later pickup. The volume and tone pots on opposite sides appeared before the pat. number on the p/up mount. The early ones are claimed to have the best sound but are more brittle. A 37 B6 went for £651 on UK ebay last weekend. Yours should be worth more.
basilh


From:
United Kingdom
Post  Posted 23 Nov 2005 4:15 pm    
Reply with quote

Mahalo Nui Colin..
Thanks for the info..I am beginning to thinks its a bit like our dog.. a "Bitsa" ( bitsa this and bitsa that)

I thought I knew most of the UK based steel players.just goes to show you doesn't it ? You must be one of the "New Generation" !!!

Do you know John Marsden or aur club magazine "Aloha Dream" ?
Baz
View user's profile Send private message Send e-mail Visit poster's website

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron