| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic Hugheyland
Goto page 1, 2  Next
Reply to topic
Author Topic:  Hugheyland
Tom Higgins

 

From:
New Jersey, USA
Post  Posted 2 Aug 2007 3:03 pm    
Reply with quote

I`m working on John Hughey`s version of "Hello Darlin",and can`t come close to getting the sustain and 'body'on those notes way up at the end of and above the fretboard.Is there one device,pedal or rackmount that is favored by the pros who can get that sound?
Thanks,
Tom
View user's profile Send private message
Michael Douchette


From:
Gallatin, TN (deceased)
Post  Posted 2 Aug 2007 4:00 pm    
Reply with quote

That would be a push/pull... sigh...
_________________
Mikey D... H.S.P.
Music hath the charm to soothe a savage beast, but I'd try a 10mm first.

http://www.steelharp.com
http://www.thesessionplayers.com/douchette.html

(other things you can ask about here)
http://s117.photobucket.com/albums/o54/Steelharp/
View user's profile Send private message Visit poster's website
Paddy Long


From:
Christchurch, New Zealand
Post  Posted 2 Aug 2007 9:05 pm    
Reply with quote

OR a ZUM !
View user's profile Send private message Send e-mail
Tommy Detamore


From:
Floresville, Texas
Post  Posted 2 Aug 2007 9:34 pm    
Reply with quote

Or a Carter ! Smile
_________________
Tommy Detamore
Quilter Labs, Goodrich Sound, Source Audio, Neunaber Audio, and Stringjoy Authorized Dealer

www.cherryridgestudio.com
www.steelguitartracksonline.com


Last edited by Tommy Detamore on 4 Aug 2007 11:59 am; edited 1 time in total
View user's profile Send private message Send e-mail Visit poster's website
Billy Wilson

 

From:
El Cerrito, California, USA
Post  Posted 2 Aug 2007 10:54 pm    
Reply with quote

Shoot!! I thoght this thread was going to be about a new theme park for steel guitarists.
View user's profile Send private message Send e-mail
Marlin Smoot


From:
Kansas
Post  Posted 2 Aug 2007 11:06 pm    
Reply with quote

A compressor can help give you some "lift" for lack of a better term. However cheap compressors can add noise or degrade the tone to your sound - I have a Keeley compressor that I use mostly for guitar but sometimes I've used it with the steel and it makes the BOSS CS-2 and CS-3 pedals sound like toys.

Then there is the other end of the rainbow where you can get a studio rack compressor but it may be too smooth for the 'effect' you may be looking for.

There are good and bad issues with compressors so you have to find what works for you - but in the meantime, try a compressor - it should help you hold out the notes in tandem with your volume pedal.

There are of course a great many other issues that help get this sound including; guitar, bar, volume pedal, the players touch...etc

I'm sure there are a few other ways of getting what you want that others may want to share, this is just my idea/suggestion for you.
View user's profile Send private message Send e-mail
Cartwright Thompson


Post  Posted 3 Aug 2007 2:01 am    
Reply with quote

Actually, Mr. Hughy has a little device that is tough to find...it's called incredible technique.
View user's profile Send private message
Leland Ogle

 

From:
Baxter Springs, Kansas, USA
Post  Posted 3 Aug 2007 2:26 am    
Reply with quote

Practise playing up there. Then practise some more.
View user's profile Send private message Send e-mail
Michael Douchette


From:
Gallatin, TN (deceased)
Post  Posted 3 Aug 2007 2:40 am    
Reply with quote

John doesn't play a Carter, he currently plays a Zum, but Howdy Darlin' was a p/p...

And yes, John sounds great whatever he plays...
_________________
Mikey D... H.S.P.
Music hath the charm to soothe a savage beast, but I'd try a 10mm first.

http://www.steelharp.com
http://www.thesessionplayers.com/douchette.html

(other things you can ask about here)
http://s117.photobucket.com/albums/o54/Steelharp/
View user's profile Send private message Visit poster's website
b0b


From:
Cloverdale, CA, USA
Post  Posted 3 Aug 2007 6:40 am    
Reply with quote

I think that a guitar either has the high notes or it doesn't. My Williams sure does! I've played guitars that died on the high notes. Something to do with the construction. Maybe the Tommy Young mod would fix it.
_________________
-𝕓𝕆𝕓- (admin) - Robert P. Lee - Recordings - Breathe - D6th - Video
View user's profile Send private message Visit poster's website
Olli Haavisto


From:
Jarvenpaa,Finland
Post  Posted 3 Aug 2007 7:10 am    
Reply with quote

I think the main reason for losing tone is losing confidence in yourself as you move up the neck.Being afraid of not being in tune makes you subconsciously attack the strings softer,maybe back off on the volume pedal etc.
_________________
Olli Haavisto
Finland
View user's profile Send private message Send e-mail
Tommy Detamore


From:
Floresville, Texas
Post  Posted 3 Aug 2007 7:14 am    
Reply with quote

I think Bob nails it...A lot of times, the area above the 12th fret is what makes or breaks a guitar for me. Lots of guitars sound good down low. And it doesn't seem to brand-specific. For example, I have played PP's that sang up there, and others that didn't make it at all...

My ....
_________________
Tommy Detamore
Quilter Labs, Goodrich Sound, Source Audio, Neunaber Audio, and Stringjoy Authorized Dealer

www.cherryridgestudio.com
www.steelguitartracksonline.com
View user's profile Send private message Send e-mail Visit poster's website
Dick Wood


From:
Springtown Texas, USA
Post  Posted 3 Aug 2007 8:04 am    
Reply with quote

Olli speaks much truth. You must play with more accuracy, pick attack and better use of the volume pedal above the the 12th fret.
View user's profile Send private message Send e-mail Visit poster's website
Jim Bob Sedgwick

 

From:
Clinton, Missouri USA
Post  Posted 3 Aug 2007 8:08 am    
Reply with quote

As Dick Wood stated: Most of the sustain problem is due to the fact that enough volume was not added. A shorter string ( made by placing the bar way up there,) will not sustain as long as a longer string. Answer, practice, practice, etc and add more volume. Technique is the answer IMHO
View user's profile Send private message
Duane Dunard


From:
Troy, MO. U.S.A.
Post  Posted 3 Aug 2007 9:32 am    
Reply with quote

I agree with everybody that posted above, however, the distance between the pick-up magnets and the strings will have a huge effect on tone and sustain. Many used guitars had pick-up replacements that were not properly adjusted or the previous owner fooled around with the adjustment screws of the origional pick-ups. Steel players are known for that. Smile
View user's profile Send private message Send e-mail
Kyle Everson

 

From:
Nashville, Tennessee
Post  Posted 3 Aug 2007 11:08 am    
Reply with quote

b0b wrote:
I think that a guitar either has the high notes or it doesn't. My Williams sure does! I've played guitars that died on the high notes. Something to do with the construction. Maybe the Tommy Young mod would fix it.


Even with great technique, some players are at a disadvantage because of their guitar. Before I had my Sho Bud rebuilt, it flat out sucked above the 12th fret. Horrible overtones, dead notes, etc. After it got new changers/fingers, it sang like it was supposed to all along.

However, I'll agree that the best guitar in the world isn't a substitute for great technique.
View user's profile Send private message
Ben Godard

 

From:
Jamesville NC
Post  Posted 3 Aug 2007 2:33 pm    
Reply with quote

Talk about no sustain. The sustain on my guitar dies so quick after the 15th fret that the sustained notes turn into stacatto. Well, maybe thats a wee bit of an exageration but nonetheless the sustain sucks.
View user's profile Send private message Send e-mail
Dave Mudgett


From:
Central Pennsylvania and Gallatin, Tennessee
Post  Posted 3 Aug 2007 3:04 pm    
Reply with quote

Hey, I'd like to know of any gizmos - or racks of stuff - that would give it, but I doubt they exist.

I have had some that I could pull it out of, and some I couldn't - it was not brand or design dependent. I've had some push-pulls - one that definitely had it, and one that definitely didn't. The first was a Bobby Bowman tweaked guitar, the other I got out of a guy's basement after sitting for several years. My guess is that properly tweaked, they can all have it.

But I have an old rack-and-barrel Bud that definitely has it in spades (no pun intended), and a Carter that sings beautifully up there. The Zum and Legrande sound very good, but still need some tweaking, I think. I think pickups and their adjustment can affect things, but I also think the bigger issue is mechanical/vibrational. It's a forced vibrational system - it's the interaction of the player with the instrument that matters, eh?

Hey, I think the theme park idea is a good one. Smile
View user's profile Send private message Send e-mail
David Nugent

 

From:
Gum Spring, Va.
Post  Posted 3 Aug 2007 3:51 pm    
Reply with quote

Tom, Have you gotten to the part where he actually plays above the fretboard? That to me was the real challenge!
View user's profile Send private message
Terry Sneed

 

From:
Arkansas,
Post  Posted 3 Aug 2007 8:34 pm     Tommy young mod
Reply with quote

Quote:
Maybe the Tommy Young mod would fix it.
_________________


Actually that's one of the main things Tommy's mod's do, is increase sustain up high on the neck. I've heard Dale Stacy's guitar before and after the mod. it works! Yea, I know, let's don't beat the poor ole horse no more. Winking Very Happy

Terry
_________________
1997 emmons legrande lll 8&5/ Nashville 112 with Fox chip mod LTD 400 / American Tele / John Jorgerson Takamine/ W/S Rob Ickes model dobro/
"May God Bless America Again"
View user's profile Send private message Send e-mail
Tim Harr


From:
Dunlap, Illinois
Post  Posted 3 Aug 2007 8:59 pm    
Reply with quote

My Carter D-10 (w/ BL 705s) has no issues in the Hughey register...


A good bar has a little bit to do with it, as does ears, and hands and.....etc
View user's profile Send private message Send e-mail
Erv Niehaus


From:
Litchfield, MN, USA
Post  Posted 4 Aug 2007 8:03 am    
Reply with quote

I think the pickup has a lot to do with it.
Also how you have your amp adjusted.
View user's profile Send private message Send e-mail
Alan Kendall

 

From:
Maury County Tennessee
Post  Posted 4 Aug 2007 8:42 am    
Reply with quote

I have to say my Carter sd10 has great sustain all the way up the neck.It's the same whether its plugged into an amp or played acoustically.I think if the steel (whatever the brand) sings when played acoustically,it's going to do the same when plugged into an amp, regardless of the pickup.Obviously different pickups do sound different from each other,but I don't think they have a lot to do with improving sustain.

Of course I could be completely wrong

Oh Well
View user's profile Send private message Send e-mail
Tommy Detamore


From:
Floresville, Texas
Post  Posted 4 Aug 2007 11:58 am    
Reply with quote

Quote:
I have to say my Carter sd10 has great sustain all the way up the neck.


"A Carter in Hugheyland"

Lots of good posts....good thread!
_________________
Tommy Detamore
Quilter Labs, Goodrich Sound, Source Audio, Neunaber Audio, and Stringjoy Authorized Dealer

www.cherryridgestudio.com
www.steelguitartracksonline.com
View user's profile Send private message Send e-mail Visit poster's website
Peter Nylund


From:
Finland
Post  Posted 4 Aug 2007 12:20 pm    
Reply with quote

It's not the guitar that takes you to Hugheyland, it's your hands. Sometimes even I can climb up there with a MCI D-10 and Barcus Berry pups
View user's profile Send private message Send e-mail Visit poster's website

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron