| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic FYI: National tricone on eBay - needs work!
Reply to topic
Author Topic:  FYI: National tricone on eBay - needs work!
Brad Bechtel


From:
San Francisco, CA
Post  Posted 1 Aug 2005 1:25 pm    
Reply with quote

"Needs work" is an understatement.


------------------
Brad's Page of Steel
A web site devoted to acoustic & electric lap steel guitars

View user's profile Send private message Send e-mail Visit poster's website
Ron Simpson

 

From:
Illinois, USA
Post  Posted 1 Aug 2005 1:50 pm    
Reply with quote

I purchased #240 some years ago. It was also in need of repair. The nut was made from a "tootsie toy" stick. The sides of the body/neck were slightly separated from the back where it curves into the body, and the cones were also trashed. The repairs were made, and it has now become a "til death do us part" instrument. I hope the new owner of this one will find similar sucess.
View user's profile Send private message Send e-mail
HowardR


From:
N.Y.C.-Fire Island-Asheville
Post  Posted 1 Aug 2005 3:17 pm    
Reply with quote

breaks my heart to see this
View user's profile Send private message Send e-mail
Doug Beaumier


From:
Northampton, MA
Post  Posted 1 Aug 2005 7:20 pm    
Reply with quote

What kind of an idiot would solder a pickup onto the body of a Tricone?! Even a non-musician can see that this instrument is a vintage classic and should be left as original as possible. This must be the same guy who routed out the underside of his quad to lighten it


------------------
My Site - Instruction | Doug's Free Tab | Steels and Accessories


View user's profile Send private message Send e-mail Visit poster's website
George Keoki Lake


From:
Edmonton, AB., Canada
Post  Posted 1 Aug 2005 8:02 pm    
Reply with quote

"....This must be the same guy who routed out the underside of his quad to lighten it...."
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Doug...As I recall the story, it was a CUSTOM T-8 which was routed out to lighten it. No need to mention names, but the guy sure ruined a beautiful guitar!
View user's profile Send private message
Doug Beaumier


From:
Northampton, MA
Post  Posted 2 Aug 2005 7:18 pm    
Reply with quote

This also reminds me of the guy who came into our store one day and announced that he was going to have his tricone "rechromed". His friend owned a plating shop and he could get the instrument chromed for free! He just had to take advantage of this great opportunity. I advised him Not to have it done because it would cut the value in half. He did it anyway because the guitar had been his grandfather’s and he wanted to “restore” it for the family, and he didn’t care about the value. Sad but true.
View user's profile Send private message Send e-mail Visit poster's website
Don Kona Woods


From:
Hawaiian Kama'aina
Post  Posted 3 Aug 2005 9:37 am    
Reply with quote

The guitar was dropped from a two story building to see if it was tough enough to survive. He just didn't tell you that part.
View user's profile Send private message Send e-mail
Chuck Fisher

 

From:
Santa Cruz, California, USA * R.I.P.
Post  Posted 3 Aug 2005 4:49 pm    
Reply with quote

yick!

a luthier could fix this, if its a silver one it might be worth the $500, but what a nasty conditin its in, it will never be a good collectabl but a player, probably.
View user's profile Send private message Send e-mail
Russ Young


From:
Seattle, Washington, USA
Post  Posted 6 Aug 2005 6:11 am    
Reply with quote

Sold -- for $780.

Somebody has bought themself quite a project -- I wish them luck ...
View user's profile Send private message Send e-mail

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron