| Author |
Topic: hook up question |
Lee Bartram
From:
Sparta, Kentucky, USA
|
Posted 12 Jun 2007 4:13 am |
|
my little group has two older Peavey XR-600b pa heads. usally one is enough but once in a while we need more than the 6 channels. my question is: can and if so how would you hook the two heads up together to have axcess to all the channels of both head to mike instruments and voices? the front panel of the amps has: outputs main,monitor and effects. inputs are aux and power amp.and it also has a graphic in and out jacks.
thanks in advaance for any info you can give. |
|
|
 |
Mike Brown
From:
Meridian, Mississippi USA
|
Posted 12 Jun 2007 5:24 am Peavey XR600B
|
|
Lee, simply connect a shielded instrument cable from
the MAIN OUT on the frontpanel of the XR unit to the AUX IN on the second XR unit. This will allow you to use all twelve channels for your mains.
If you have further questions, please feel free to contact me toll free at 1-877-732-8391, ext. 1180.
Mike Brown
Peavey USA |
|
|
|
Lee Bartram
From:
Sparta, Kentucky, USA
|
Posted 12 Jun 2007 10:43 am
|
|
| thanks Mike for the info... |
|
|
|
