| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic My New Williams
Goto page 1, 2  Next
Reply to topic
Author Topic:  My New Williams
Larry Jamieson


From:
Walton, NY USA
Post  Posted 25 Apr 2007 6:31 am    
Reply with quote




Fed-Ex delivered my new Williams, single ten wide body yesterday. It has a curly maple cabinet with the vintage "rope style" inlay. The color is burgandy red. Pedals are Emmons A, B, and C in positions 1, 2 and 3, with the Franklin change on pedal 4. It has 5 knee levers.
This guitar has the new 600 series changer, with hardened steel fingers. The strings are fed through the fingers so that if one breaks, the ball falls harmlessly on the end of the guitar, not inside the changer. Bill Rudolph finished this guitar in less than three months after I placed my order.
I spent some time trying the guitar out in my shop yesterday, then took it on a gig last night. This is a sweet new axe and a pleasure to play. Bill was great to deal with and still builds beautiful, natural wood guitars in your choice of woods and finishes.
Larry Jamieson
View user's profile Send private message Send e-mail Visit poster's website
Dan Beller-McKenna


From:
Durham, New Hampshire, USA
Post  Posted 25 Apr 2007 7:05 am    
Reply with quote

Gorgeous Axe!!! Congratulations Larry.

Dan
_________________
Durham, NH
dbmCk mUSIC
View user's profile Send private message Send e-mail Visit poster's website
Dick Wood


From:
Springtown Texas, USA
Post  Posted 25 Apr 2007 7:18 am    
Reply with quote

Bill makes a great looking guitar not only on the top but also on the bottom side too.I bought a D10 from him a year ago and I just talked to him about an SD10 Keyless in a sunburst finish.

Enjoy your new guitar!
View user's profile Send private message Send e-mail Visit poster's website
ray qualls


From:
Baxter Springs, Kansas (deceased)
Post  Posted 25 Apr 2007 8:01 am    
Reply with quote

Great looking steel Larry! I know that you'll enjoy it. Congrats, Ray
P.S. Look me up when you come to Miami again and I'll buy you a cup of coffee.
_________________
Ray Qualls
Member(KSGA)
Inducted into KSGA
Steel Guitar Hall of Fame 2008
View user's profile Send private message Send e-mail
John De Maille


From:
On a Mountain in Upstate Halcottsville, N.Y.
Post  Posted 25 Apr 2007 1:00 pm    
Reply with quote

Larry,
That's a great looking "Willy". Lots of luck with it. Hope to see you in the near future.

PS- Did you wear out your Zum ?
View user's profile Send private message Send e-mail
Mike Ester


From:
New Braunfels, Texas, USA
Post  Posted 25 Apr 2007 1:19 pm    
Reply with quote

Very nice.
View user's profile Send private message Send e-mail Visit poster's website
Larry Lorows

 

From:
Zephyrhills,Florida, USA
Post  Posted 25 Apr 2007 1:30 pm    
Reply with quote

Super looking guitar for sure. I know I have had a Williams U12, for years and I still love it. Larry
_________________
U12 Williams keyless 400
Vegas 400, Nashville 112, Line 6 pod xt
View user's profile Send private message Send e-mail
Larry Jamieson


From:
Walton, NY USA
Post  Posted 25 Apr 2007 4:45 pm    
Reply with quote

Gentlemen: Thanks for all the positive comments.
Ray, I will try to get up to Baxter Springs for that cup of coffee sometime this summer.
John, I still have my Zum, it is a keeper! Had an older MSA for a 2nd guitar and I decided to move up to a newer model with the Franklin pedal. Larry, hope to get back up to Cortland sometime. Does your band have a schedule posted on the web? We are at www.countryexpressmusic.com. Best regards,
Larry J.
View user's profile Send private message Send e-mail Visit poster's website
KENNY KRUPNICK

 

From:
Columbus, Ohio
Post  Posted 25 Apr 2007 5:49 pm    
Reply with quote

Nice Guitar Larry.How's the pedal travel, long,or short? In that I mean,do you have to push the pedals way down,or do you have to push down a short stroke? Very Happy
View user's profile Send private message Send e-mail
Brad Malone

 

From:
Pennsylvania, USA
Post  Posted 25 Apr 2007 7:21 pm     New Williams S10WB
Reply with quote

Larry, thanks for your post, your new Williams Steel looks great. I just received word from Bill that my Williams S10WB will be in the next batch and will be done in two to three months...the color I chose is just like yours.
View user's profile Send private message Send e-mail
Tommy Young

 

From:
Ethelsville Alabama
Post  Posted 25 Apr 2007 7:44 pm     New Willie
Reply with quote

Beautiful guitar, my kind of color too been thing of a new one just needin to work on more and save my pennies bet it cost several two pennies that is haha PS: What kind pup is that?????
View user's profile Send private message Send e-mail Visit poster's website
Stu Schulman


From:
Ulster Park New Yawk (deceased)
Post  Posted 25 Apr 2007 10:05 pm    
Reply with quote

Man,that's a Beaut!
_________________
Steeltronics Z-pickup,Desert Rose S-10 4+5,Desert Rose Keyless S-10 3+5... Mullen G2 S-10 3+5,Telonics 206 pickups,Telonics volume pedal.,Blanton SD -10,Emmons GS_10...Zirctone bar,Bill Groner Bar...any amp that isn't broken.Steel Seat.Com seats...Licking paint chips off of Chinese Toys since 1952.
View user's profile Send private message Send e-mail
Per Berner


From:
Skovde, Sweden
Post  Posted 25 Apr 2007 10:16 pm    
Reply with quote

That's a mighty purdy one, fersure. Congrats!
View user's profile Send private message Send e-mail Visit poster's website
Larry Jamieson


From:
Walton, NY USA
Post  Posted 26 Apr 2007 7:06 am    
Reply with quote

Thanks again for your positice comments, guys. Kenny, the pedal travel is pretty short. My old MSA had a long pedal travel, but the new Williams is more like my Zum, maybe an inch to an inch and a half at most. The Franklin pedal requires the most effort, but it is lowering three strings...
Brad, I know your will like your new Willy when it gets finished. Make it a great day!
Larry J.
View user's profile Send private message Send e-mail Visit poster's website
Brad Malone

 

From:
Pennsylvania, USA
Post  Posted 26 Apr 2007 7:23 am     New Willy
Reply with quote

Larry, Thanks, I'm like a little boy waiting for a new toy. From what I've read, the "Series 600 changer" is the most advanced and innovative one on the market...some people say the sustain is really great and the 24 & 1/4 scale allows for great harmonics. I also like the idea of the strings bending less at the changer. Bill also said that with the S10WB, the leg stance is the same as a D10, for great stability.
View user's profile Send private message Send e-mail
Larry Jamieson


From:
Walton, NY USA
Post  Posted 26 Apr 2007 10:27 am    
Reply with quote

Tom, Sorry I missed your question. The pickup is a George L E-66. Supposed to reproduce the sound that made Buddy Emmons famous circa 1966... I wanted a humbucking pickup since I have had some issues with hum in the past. This is a humbucker with a brighter sound than some others. It is absolutely quiet, even up in Hughey land. The sustain is good way up the neck and the guitar seems very stable. I don't think it weighs any less than my SD10 Zum.
Larry J.
View user's profile Send private message Send e-mail Visit poster's website
Jamie Lennon


From:
Nashville, TN
Post  Posted 26 Apr 2007 11:36 am    
Reply with quote

Hey great Steel !!! Congrats, seems like the " new steel " flu is spreading !!!!
_________________
Mullen Guitars, Little Walter Amps, Benado Effects, D'Addario Strings

www.georgettejones.net
View user's profile Send private message Send e-mail
Mickey Adams


From:
Bandera Texas
Post  Posted 26 Apr 2007 2:21 pm     Wow
Reply with quote

That is one very good looking guitar.....Congratulations!
_________________
ARTIST RELATIONS: MSA GUITARS
2017 MSA LEGEND XL D10, S10, Studio Pro S12 EXE9
Mullen G2, Rittenberry S10, Infinity D10, Zumsteel 8+9
Anderson, Buscarino, Fender, Roman Guitars, Sarno Octal, Revelation Preamps, BJS BARS, Lots of Blackface Fenders!
View user's profile Send private message Send e-mail Visit poster's website
Rick Kornacker


From:
Dixon Springs, Tennessee, USA
Post  Posted 29 Apr 2007 11:42 am     thumbs up!
Reply with quote

Hey Larry!
Congrats on your new axe...something about that traditional "vibe". Just sold my "Willy" to a fellow forumite...it was virtually identical to yours except in color and the fact that it is a "400 series". Have a new "Willy" D-10 on order that will probably be a little less conservative in the color/scheme. Question...didn't see the split-tuning screws on the changer end...just wondering. I sincerely believe that the Williams guitar is fixin' to take a major leap in recognition and desirability into the "top-shelf" category. Kudos to Bill R. and all those that build fine guitars...it just keeps getting "gooder" Regards, RK
_________________
"think MORE...play LESS"
View user's profile Send private message Send e-mail
Brad Malone

 

From:
Pennsylvania, USA
Post  Posted 29 Apr 2007 1:21 pm     New Willy
Reply with quote

Hey Rick, Bill said he would start the new batch on 5-4-07...looks like we will be getting our Steels by July or August...good luck with your D-10, I'm getting the S10WB, I already have a Mullen D-10, which I'm keeping. When a pro, like you, keeps going back it helps the brand take that major leap you were talking about.
View user's profile Send private message Send e-mail
Isaac Stanford

 

From:
Philadelphia, PA
Post  Posted 29 Apr 2007 2:18 pm     Nice
Reply with quote

Great looking guitar. Matches the carpet.
View user's profile Send private message Send e-mail
KENNY KRUPNICK

 

From:
Columbus, Ohio
Post  Posted 1 May 2007 5:40 pm    
Reply with quote

An inch to a inch and a half of pedal travel is WAY too much.That much, the guitar would be playing you. Sad
View user's profile Send private message Send e-mail
Brad Malone

 

From:
Pennsylvania, USA
Post  Posted 5 May 2007 4:37 pm     Willy
Reply with quote

Larry how does your New Williams compare to your Zum, tonewise and playability?
View user's profile Send private message Send e-mail
Curt Langston


Post  Posted 6 May 2007 9:04 am     Not so................
Reply with quote

Quote:
An inch to a inch and a half of pedal travel is WAY too much.That much, the guitar would be playing you.


No Kenny, actually that is the sweet spot. Most any guitar can be adjusted to have long OR short throw. The ideal actual pedal travel is 1 to 1 1/2 inch. Now, that is measuring from the pedals very end, or tip. (closet to you)
View user's profile Send private message
John De Maille


From:
On a Mountain in Upstate Halcottsville, N.Y.
Post  Posted 6 May 2007 10:54 am    
Reply with quote

Larry,
On your new Williams, does it pull the strings over the changer as the Lamar does, or does it bend the strings over the changer, as do most modern changers do? It's hard to tell from the picture of the changer. Lamar Colvin's changer actually pulls the string and lessens the string, to change it's pitch. Supposedly less string breakage that way. I was just curious. Good luck, it's a beautiful steel.
View user's profile Send private message Send e-mail

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron