| Author |
Topic: LExicon MX200 |
Bo Borland
From:
South Jersey -
|
Posted 28 Mar 2007 9:16 am |
|
I tried it out running the steel thru it yesterday ..the sound was not bad.
I heard it was a linelevel box.. should it be patched thru the efx in/out?
_________________
Bo Borland
Rittenberry SD10 , Derby D-10, Quilter TT12, Peavey Session 400 w/ JBL, NV112, Fender Blues Jr. , 1974 Dobro 60N squareneck, Rickenbacher NS lapsteel, 1973 Telecaster Thinline, 1979 blonde/black Frankenstrat
Currently picking with
Mason Dixon Band masondixonband.net |
|
|
 |
Lynn Stafford
From:
Ridgefield, WA USA
|
Posted 28 Mar 2007 9:40 am
|
|
Bo,
Yes, indeed! I found out after I bought one of those units that it does need a line level signal at the input!! Just patch it through your amp's effects loop and I think you'll be very pleased with how much better it will work 
_________________
Best regards,
Lynn Stafford
STEEL GUITAR WEST
http://www.steelguitarwest.com
Steel Guitar Technician (Restoration, Set-up, Service and Repair work)
Previous Emmons Authorized Dealer & Service Technician (original factory is now closed)
ZumSteel Authorized Service Technician
---------------------------------- |
|
|
|
Lee Baucum
From:
McAllen, Texas (Extreme South) The Final Frontier
|
Posted 28 Mar 2007 11:26 am
|
|
| I used an MPX-100 for quite a few years. It had both an input level knob and an output level knob. It worked equally well between the volume pedal and amp input and in the f/x loop of my Evans and my Nashville 400. |
|
|
|
