| Author |
Topic: Korg-ToneWorks AX1500G users? |
Bernie Straub
From:
Folly Beach, South Carolina, USA
|
Posted 28 Mar 2007 10:20 am |
|
I have just ordered the Korg-ToneWorks AX1500G signal processor, and while I endure the wait on delivery I was wondering if any of you were using this rig, and if you had any info on settings, etc. that you'd like to share. I plan to use it between my Fessy D10 and Nashville 1000. Thanks gang!
Bernie |
|
|
 |
Bernie Straub
From:
Folly Beach, South Carolina, USA
|
Posted 30 Mar 2007 4:42 am
|
|
| Bump |
|
|
|
Jay Fagerlie
From:
Lotus, California, USA
|
Posted 30 Mar 2007 5:50 am
|
|
I have the AX1000G, which is basically the same, but earlier model.
The thing is really easy to program and use, the sounds are pretty good. I've been using mine for about 5 years now...I've used it in a country band, a rock band, and most recently in a belly dance band playing middle eastern music.
The only thing I would caution you about is it does NOT like hot signals....my fretless 11 string will overdrive the front end if I'm not carefull, and I can't plug my Dekley SD12 into it without keeping the volume pedal way down, even with the input gain on the unit down.
Other than that, it's a great pedal.
Jay |
|
|
|
Bernie Straub
From:
Folly Beach, South Carolina, USA
|
Posted 30 Mar 2007 9:15 am
|
|
Jay, thanks for taking the time to reply, and for the heads up on levels. After I have the unit a while, I'll post a review. Thanks again.
_________________
Bernie Straub
GFI Ultra S-10/Fessy D-10 |
|
|
|
