| Author |
Topic: Fender Champ (studio deluxe) control layout?? |
Rich Hlaves
From:
Wildomar, California, USA
|
Posted 7 Mar 2007 3:41 pm |
|
The balance of my project arrived in today's mail and I get the pleasure of puting the little guitar together tonight! (with a strat PU until my Lollar arrives)
The question is: Did Fender put the volume control in the forward most hole of the control plate or was the tone control mounted there? I am calling the forward most hole location the one closest to the nut.
Any takers? Thanks in advance,
Rich |
|
|
 |
Ron Simpson
From:
Illinois, USA
|
Posted 7 Mar 2007 6:44 pm
|
|
| Fender did the volume toward the nut, and the tone toward the bridge. |
|
|
|
Rich Hlaves
From:
Wildomar, California, USA
|
Posted 7 Mar 2007 10:02 pm
|
|
| Thanks Ron, I'll do the same. |
|
|
|
Dave Zielinski
From:
Pennsylvania, USA
|
Posted 8 Mar 2007 8:30 am
|
|
When you wire it up, make the wires long enough to rotate the whole assembly around... I always run the tone control forward- its in the right spot to do boo-wah tone swells. If your wires ar elong enough (but not too long) you can switch it either way you like.
Dave |
|
|
|
Rich Hlaves
From:
Wildomar, California, USA
|
Posted 8 Mar 2007 11:02 am
|
|
Dave, I did exactly that. I'll be getting the Lollar PU shortly and will make a permanent install(tone in front) using push back wire so at least it looks original.
Thanks for the input!
Rich |
|
|
|
