| Author |
Topic: 022 wound for 6th string |
William Peters
From:
Effort, Pennsylvania, USA
|
Posted 5 Mar 2007 8:31 am |
|
I want to try using a wound 6th on my Mullen RP SD-12. Does anyone know which bellcrank hole I will have to use for the 1/2 tone raise on P2, and the full tone on P7?
Thanks.
_________________
Bill
Mullen RP SD12U, Carvin SX200C |
|
|
 |
David Doggett
From:
Bawl'mer, MD (formerly of MS, Nawluns, Gnashville, Knocksville, Lost Angeles, Bahsten. and Philly)
|
Posted 5 Mar 2007 10:27 am
|
|
| Bill, if the unwound string was 022, you might want to try 024 or heavier for the wound string. Wound strings are a slightly higher gauge for the same pitch. This will also help keep the pull from being too long. |
|
|
|
William Peters
From:
Effort, Pennsylvania, USA
|
Posted 5 Mar 2007 10:53 am 022 wound
|
|
David,
I currently have an 020 for my 6th string, so 022 is probably the right size. I'm just looking for which holes in the bellcranks to use, to save me a little time underneath.
Thanks though 
_________________
Bill
Mullen RP SD12U, Carvin SX200C |
|
|
|
b0b
From:
Cloverdale, CA, USA
|
Posted 5 Mar 2007 11:08 am
|
|
I don't know the Mullen bell crank, but for sure you will have to move the rods down (further from the crossrod) by a notch or two. Start with two notches and if it's too much slack, back up to one notch.
_________________
-𝕓𝕆𝕓- (admin) - Robert P. Lee - Recordings - Breathe - D6th - Video |
|
|
|
John Fabian
From:
Mesquite, Texas USA * R.I.P.
|
Posted 5 Mar 2007 11:34 am
|
|
Use the same hole as the 3rd string for a wound 6th for P2.
P7 will need to be moved 1 or 2 holes further away from the cross shaft. |
|
|
|
William Peters
From:
Effort, Pennsylvania, USA
|
Posted 5 Mar 2007 11:48 am 022 wound
|
|
OK, thanks guys. That will save me some time I think.
_________________
Bill
Mullen RP SD12U, Carvin SX200C |
|
|
|
Justin Griffith
From:
Taylor, Texas, USA
|
Posted 5 Mar 2007 6:38 pm
|
|
I hope you like the wound string as much as I do.
It is a night and day difference
Justin |
|
|
|
Jay Jessup
From:
Charlottesville, VA, USA
|
Posted 6 Mar 2007 7:50 am
|
|
Has anybody actually used a wound 6'th on a universal with a whole tone raise? That sounds like a looonnngg way to pull that skinny wound string  |
|
|
|
