MSA parts wanted

Stuart Sawney · From: High Wycomb, Bucks, United Kingdom

Hi.I am a member from the UK. I have a 12 string MSA Vintage XL. I need....

A) 3 or 4 pull rod Bushes ( that locate in holes on changer, at tuning end ) Aluminium about 1.25" long.

B) 3 or 4 brass pull rod retainers with small allen key grub screws( these locate in retainer that fits on crosshaft ) Brass about .25" x .25"

Any help greatly appreciated.Have Paypal.

Thanks STUART

[This message was edited by Stuart Sawney on 25 January 2006 at 08:33 AM.]

[This message was edited by Stuart Sawney on 25 January 2006 at 08:35 AM.]

Chris Grotewohl · From: Kansas City (Roeland Park)

Stuart, I made my own out of a straight piece of 1/4 alum Tube. Should be able to get that at a HW store or Welding supply store ,,,CG

Chris Allen Burke · From: Signal Hill, CA

Beware! don not accept any inquiries from Randy Reimer in Canada. He is swindeler, cheat and fraud. All Briscoe is great for MSA parts.

Good luck
CAB

Stuart Sawney · From: High Wycomb, Bucks, United Kingdom

Still looking guys !! Have mailed Al Brisco + Linkon Guitars. Any other ideas ?? Thanks in advance.

Daniel J. Cormier · From: Lake Charles, LA, USA

I have the brass ones to fit the beel crank and Might have 4 of the sleeves for the tuner end. Emial Me.

------------------
Daniel J. Cormier Whatever D-10 I happen to have at the moment.
EVans FET 500 LV ,ProFex II
http://www.cajunsteelguitar.com email at djcormier@cox-internet.com

Stuart Sawney · From: High Wycomb, Bucks, United Kingdom

Hi, Thanks Daniel check your mail. Thanks also to Al Brisco in Canada, he also has the parts.I think we can now close this thread. Thanks to all.

Forum Index > Wanted To Buy		Next oldest topic :: Next newest topic

All times are GMT - 8 Hours	Jump to: