| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic parted out Ricky
Goto page 1, 2  Next
Reply to topic
Author Topic:  parted out Ricky
Ron Victoria

 

From:
New Jersey, USA
Post  Posted 21 Aug 2006 10:51 am    
Reply with quote

I just saw this Ricky body on Ebay. If you check sellers other items, you will find the rest of it. What a shame!!!
Auction on eBay.

Ron

[This message was edited by Brad Bechtel on 21 August 2006 at 03:06 PM.]

View user's profile Send private message Send e-mail
John Rosett


From:
Missoula, MT
Post  Posted 21 Aug 2006 11:34 am    
Reply with quote

i know, that is really irratating. i emailed the seller(some pawn shop), and asked them why they're doing it. if they reply, i'll post it.
View user's profile Send private message Send e-mail
Richard Shatz


From:
St. Louis
Post  Posted 21 Aug 2006 12:29 pm    
Reply with quote

From the color of the plates and the tailpiece that's a Bronson Model 52, a very rare bird.
View user's profile Send private message
Andy Sandoval


From:
Bakersfield, California, USA
Post  Posted 21 Aug 2006 12:59 pm    
Reply with quote

I just noticed in the photo that it's a "tail piece" model and not the "strings through the body"...I was startin to get a wild hair about bidding on it.
View user's profile Send private message Send e-mail Visit poster's website
Ron Victoria

 

From:
New Jersey, USA
Post  Posted 21 Aug 2006 1:23 pm    
Reply with quote

Are all those parts from that body?
Ron
View user's profile Send private message Send e-mail
AJ Azure

 

From:
Massachusetts, USA * R.I.P.
Post  Posted 21 Aug 2006 1:40 pm    
Reply with quote

It's sleazy but, it's smart e-baying in theory. Seperating it out guarantees a bidding war on each auction. It will be interesting to see if it actually works.
View user's profile Send private message Send e-mail
John Dahms

 

From:
Perkasie, Pennsylvania, USA
Post  Posted 21 Aug 2006 2:38 pm    
Reply with quote

"It's sleazy but, it's smart e-baying in theory. Seperating it out guarantees a bidding war on each auction. It will be interesting to see if it actually works."

Interesting? Interesting?
Interesting like watching lions tear up Christians at the Colloseum! It goes against everything I have done in the more than 35 years I have been a collector. It's just not the right thing to do.
View user's profile Send private message Send e-mail
Richard Sevigny


From:
Salmon Arm, BC, Canada
Post  Posted 21 Aug 2006 3:36 pm    
Reply with quote

Just think of it as "supply side economics".

Greed is the latest vice spun into a virtue.

View user's profile Send private message Send e-mail Visit poster's website
Andy Sandoval


From:
Bakersfield, California, USA
Post  Posted 21 Aug 2006 4:02 pm    
Reply with quote

Man, I just saw all the rest of the guitar on his other auctions. I think a "public caning" is in order here, what a shame!

[This message was edited by Andy Sandoval on 21 August 2006 at 05:05 PM.]

View user's profile Send private message Send e-mail Visit poster's website
AJ Azure

 

From:
Massachusetts, USA * R.I.P.
Post  Posted 21 Aug 2006 6:22 pm    
Reply with quote

Hey I didn't do it. Just made an observation as to why. Don't jump at me lion!
View user's profile Send private message Send e-mail
Curt Langston


Post  Posted 21 Aug 2006 6:36 pm    
Reply with quote

Well, what if you were looking to find just one part of a bakelite?.... The thing about parting out guitars is this: The seller will sell everything, with a sum total more than if he sold it as a "unit". And, as a bonus, more people can complete their guitar with the parts of this one. It is not all bad.
View user's profile Send private message
Doug Beaumier


From:
Northampton, MA
Post  Posted 21 Aug 2006 7:00 pm    
Reply with quote

Here is a picture of the guitar before he tore it apart.



It was missing the tone control and one of it's plates, and that volume knob looks suspect. I'll bet the electronics had been cobbled and the guitar didn't work. That's no excuse for parting it out IMHO. The main parts were all there, the pickup, tuners, fretboard, etc. I can understand parting out a guitar if the pickup and all electronics are gone, etc. but this one is a tough call. I notice that the seller is a Pawn Shop.

[This message was edited by Doug Beaumier on 21 August 2006 at 09:22 PM.]

View user's profile Send private message Send e-mail Visit poster's website
Doug Beaumier


From:
Northampton, MA
Post  Posted 21 Aug 2006 7:05 pm    
Reply with quote

Original Rickenbacher Tuners? Not!


[This message was edited by Doug Beaumier on 22 August 2006 at 01:14 PM.]

View user's profile Send private message Send e-mail Visit poster's website
Bill Creller

 

From:
Saginaw, Michigan, USA (deceased)
Post  Posted 22 Aug 2006 6:23 am    
Reply with quote

You really can't expect much from a guy running a pawn shop. It looks like he has sold a lot of stuff. That guitar is a Bronson, and I told him so. Bobby ingano had one years ago and was very disappointed with it, so maybe it's not as sad as we assume.
View user's profile Send private message Send e-mail
Doug Beaumier


From:
Northampton, MA
Post  Posted 22 Aug 2006 12:05 pm    
Reply with quote

A lot of Bronson lap steels and amps were made by Valco and Dickerson. The Bronson Melody King was built by Rickenbacker in the 1950s and it's considered to be the best of the Bronson lap steels.

Here are some pictures of an all original Bronson Melody King. What a beauty!











It looks like the one being parted out is missing a few parts.. eh?

Below is a “Valco” Bronson.



[This message was edited by Doug Beaumier on 22 August 2006 at 01:21 PM.]

View user's profile Send private message Send e-mail Visit poster's website
Bill Creller

 

From:
Saginaw, Michigan, USA (deceased)
Post  Posted 22 Aug 2006 3:05 pm    
Reply with quote

Bronson also sold some that looked like MOTS Dickersons and MOTS Magnatones. A friend in Toronto has a Bronson MOTS, and it weighs nothing and sounds great.
View user's profile Send private message Send e-mail
Doug Beaumier


From:
Northampton, MA
Post  Posted 23 Aug 2006 12:40 am    
Reply with quote

I had a very nice 1940s Bronson a while back... wood body, dark stain, white binding, screw-on connector, open gear tuners. It looked a little Gibson-ish, but I believe it was built by Valco.

George Bronson was a steel guitar teacher in Detroit from the 1930s until the 1950s, and he sold a lot of lap steels and amps under his brand name. Also guitars and a lot of sheet music.

Here's more:









[This message was edited by Doug Beaumier on 23 August 2006 at 01:41 AM.]

View user's profile Send private message Send e-mail Visit poster's website
Richard Shatz


From:
St. Louis
Post  Posted 23 Aug 2006 7:06 am    
Reply with quote

Doug,
That Bronson Melody King and the matching amp of the same name used to belong to me. Great steel, just like the BD6 but with brown Bakelite body. The amp wasn't too bad either even with the original tubes.
I sold the set to a guy named Bronson for a pretty high price 6 or 7 years ago. He just had to have them. Looking at that photo I took I'm starting to suffer from seller's remorse again.
View user's profile Send private message
Rick Aiello


From:
Berryville, VA USA
Post  Posted 23 Aug 2006 8:23 am    
Reply with quote

You can count on those 1.25" magnets goin' off at a hefty price ...

RIC bass players ...

------------------

Dustpans LTD.
The Casteels
HSGA




View user's profile Send private message Send e-mail Visit poster's website
Tighe Falato


From:
South Plainfield, New Jersey, USA
Post  Posted 23 Aug 2006 10:56 am    
Reply with quote

The vintage parts market has become huge as all one needs to do is look in an issue of Vintage Guitar and you'll note dealers who sell nothing else. It has become big business on eBay as well. I agree that parting out a vintage instrument can be almost criminal however just like a car, the sum of its parts, in many cases, is worth more than the whole. To the less than savy player or collector it makes financial sense to part it out especially when it is already missing some or has significant damaged. You can sell it as a "project" but I bet many of those end up in parts bins. Also it allows those who already own those vintage gems an opportunity to purchase a missing or defective part. I would think many forumites have been on boths sides of this fence.
I happen to own the Rickenbacker-Bronson steel and Valco amp and must say it's a beautiful steel both in looks and tone. As Richard pointed out the amp is pretty decent as well but unfortunately no one named Bronson has offered me big bucks for mine yet
View user's profile Send private message Send e-mail Visit poster's website
Doug Beaumier


From:
Northampton, MA
Post  Posted 23 Aug 2006 2:12 pm    
Reply with quote

I have no problem parting out a guitar that has major parts missing, like pickups, if I know I will never find those original parts anywhere.

I have also been a thankful Buyer of vintage parts. I managed to snag original tuners and bridge cover for my '68 telecaster, and I was extremely happy to find those parts.

Vintage parts breathe new life into an otherwise crippled guitar, so that is a good thing. However, tearing apart a complete working guitar and selling it's parts is unconscionable IMHO.
View user's profile Send private message Send e-mail Visit poster's website
Doug Beaumier


From:
Northampton, MA
Post  Posted 23 Aug 2006 2:45 pm    
Reply with quote



[This message was edited by Doug Beaumier on 24 August 2006 at 09:33 PM.]

View user's profile Send private message Send e-mail Visit poster's website
Rick Aiello


From:
Berryville, VA USA
Post  Posted 31 Aug 2006 11:28 am    
Reply with quote

quote:
You can count on those 1.25" magnets goin' off at a hefty price ...

RIC bass players ...




$338

------------------

Dustpans LTD.
The Casteels
HSGA



[This message was edited by Rick Aiello on 31 August 2006 at 12:37 PM.]

View user's profile Send private message Send e-mail Visit poster's website
Mike D

 

From:
Phx, Az
Post  Posted 31 Aug 2006 11:46 am    
Reply with quote

But why would Ric bass players being buying old 'shoes off eBay? Ric makes NEW 'shoes don't they?

------------------
Half-assed bottleneck and lap slide player. Full-assed Builder of resonator instruments.


View user's profile Send private message Send e-mail
Karl Oberlander

 

From:
Austin, Texas, USA
Post  Posted 31 Aug 2006 3:11 pm    
Reply with quote

Well, one thing is for sure. If you cruise this end of the forum you're bound to run into some of these type things. And it always stirs up a flurry of responses. I guess it's all just about the bottom line for a pawn broker. But as a Rick owner thrice times over I hate to see it happen!

Keep slidin' guys.

Kobe

------------------
Gibson D-8 Console Grande - Stringmaster T-8 - Alkire EHarp D-10
Fender Super Reverb
kobe@austin.rr.com
http://home.austin.rr.com/kobeco

View user's profile Send private message Send e-mail

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron