| Author |
Topic: Buzz on 6 th string on reso |
Jim Keith
From:
Anna Texas, USA
|
Posted 4 Jun 2007 12:51 pm |
|
My reso has developed a buzz when I hit the big string a little too loudly. Being new to these critters, where should I look for the problem? 
It is tuned C6 so the string gage is only 032.
Any Ideas? |
|
|
 |
Andy Volk
From:
Boston, MA
|
|
|
|
Jude Reinhardt
From:
Weaverville, NC
|
Posted 4 Jun 2007 11:45 pm Re: Buzz on 6 th string on reso
|
|
| Jim Keith wrote: |
My reso has developed a buzz when I hit the big string a little too loudly. Being new to these critters, where should I look for the problem?
It is tuned C6 so the string gage is only 032.
Any Ideas? |
Jim, I suspect your reso was originally set up to have dobro strings with a "big string" that's about .056 diameter. Could be the string groove in the nut and saddle are the problem.
_________________
"If we live in fear of banjos, then the banjos have won".
"Man cannot live by bread alone, he must have Peanut Butter". - Kruger Bear |
|
|
|
Rick Jolley
From:
Colorado Springs
|
Posted 5 Jun 2007 6:20 am
|
|
That's a good article -- one I didn't run into when I was looking last year. I'm on stew-mac's mailing list; they send me something every month, but I didn't have that one.
Thanks so much!
Rick
This forum is amazing! |
|
|
|
Joseph Rush Wills
From:
New Jersey, USA
|
Posted 7 Jun 2007 12:28 pm BUZZ ON RESO
|
|
It might be the spider rattling against the cone. Take an un-sharpened pencil, posicle stick or such, reach in through a hole in the cover plate near the edge and push on the side of the spider to move it very slightly. That sometimes fixes the buzz...but BE CAREFUL!
Dick Blattenberger taught me that trick!
Joe Wills |
|
|
|
Joseph Rush Wills
From:
New Jersey, USA
|
Posted 7 Jun 2007 12:29 pm RESO BUZZ
|
|
That should read "popsicle stick"!
Joe |
|
|
|
