Author |
Topic: pedal rod extension? |
Stu Schulman
From: Ulster Park New Yawk (deceased)
|
Posted 27 Apr 2007 11:51 am
|
|
I need about 1/4" more length on the pedal rods of my Dekley,Is there a product that I can buy without having to get longer rods?Stu
_________________ Steeltronics Z-pickup,Desert Rose S-10 4+5,Desert Rose Keyless S-10 3+5... Mullen G2 S-10 3+5,Telonics 206 pickups,Telonics volume pedal.,Blanton SD -10,Emmons GS_10...Zirctone bar,Bill Groner Bar...any amp that isn't broken.Steel Seat.Com seats...Licking paint chips off of Chinese Toys since 1952. |
|
|
|
Colby Tipton
From: Crosby, Texas, USA
|
Posted 27 Apr 2007 2:44 pm
|
|
For 1/4" I would have to say it would be a waste of time and money, for an inch it may be worth it. I wish I had 1/8" or a 1/16" sometimes. I just learn how to work around something that small. Just my thoughts. |
|
|
|
Stu Schulman
From: Ulster Park New Yawk (deceased)
|
Posted 27 Apr 2007 3:15 pm
|
|
Colby,I agree with you...But it would be perfect if the pedals were just that much lower,I was hoping for some kind of extension nut?
Stu _________________ Steeltronics Z-pickup,Desert Rose S-10 4+5,Desert Rose Keyless S-10 3+5... Mullen G2 S-10 3+5,Telonics 206 pickups,Telonics volume pedal.,Blanton SD -10,Emmons GS_10...Zirctone bar,Bill Groner Bar...any amp that isn't broken.Steel Seat.Com seats...Licking paint chips off of Chinese Toys since 1952. |
|
|
|
Alan Brookes
From: Brummy living in Southern California
|
Posted 27 Apr 2007 5:40 pm
|
|
Carter sell extender kits in various lengths, which consist of a four threaded tubes for the legs, and rod extenders. You might contact them to ensure that the threads are the same diameter as your machine. |
|
|
|
John Coffman
From: Wharton,Texas USA
|
Posted 27 Apr 2007 6:59 pm
|
|
Stu I assume your rods are 10/32" if so you can order rod extenders from one inch to two inch. You can also buy the 10/32 studs all from Grainger.com an industry supplier. I know you only need a little but there are ways to get what you need. They ship everywhere and most is next day. Shoot me and email if you need further assists. I have to add lift kits to every steel I have owned so I can give you some tips. _________________ ShowPro SD10, Mullens RP, Bose S1 Pro, GK MB200, MB500, Bugera T50 Tube amp with SlidgeRig, TC HOF reverb effect. |
|
|
|
Stu Schulman
From: Ulster Park New Yawk (deceased)
|
Posted 27 Apr 2007 7:09 pm
|
|
John,Thanks so much...They seem to have everything that I will need...Regards,Stu _________________ Steeltronics Z-pickup,Desert Rose S-10 4+5,Desert Rose Keyless S-10 3+5... Mullen G2 S-10 3+5,Telonics 206 pickups,Telonics volume pedal.,Blanton SD -10,Emmons GS_10...Zirctone bar,Bill Groner Bar...any amp that isn't broken.Steel Seat.Com seats...Licking paint chips off of Chinese Toys since 1952. |
|
|
|
John Coffman
From: Wharton,Texas USA
|
Posted 27 Apr 2007 7:25 pm
|
|
Glad I could help. Oh it is nice to have a tap and a die 10/32" size to clean threads as need. Your local hardware store should be able order these. PS I just had to special order a 4-40" die to make some new pull rods. _________________ ShowPro SD10, Mullens RP, Bose S1 Pro, GK MB200, MB500, Bugera T50 Tube amp with SlidgeRig, TC HOF reverb effect. |
|
|
|