Author |
Topic: Best product for fine Mica scratches? |
Jay Ganz
From: Out Behind The Barn
|
Posted 19 Apr 2007 6:17 am
|
|
You know.....something that will fill in extra fine
scratches in mica (with multiple coats) that isn't
too glossy. I've used finishing wax which does
a decent job, but looking for something a bit better.
Anything out there that'll do the job ![Question](images/smiles/icon_question.gif) |
|
|
![](templates/respond/images/spacer.gif) |
Colby Tipton
From: Crosby, Texas, USA
|
Posted 19 Apr 2007 3:37 pm
|
|
I don't think you will find anything better than what you have tried so far, just my thoughts. You only see the places from surtain angles anyway. I see all sorts of stuff on anything I have, I have just learned to live with the fact that nothing ain't perfect. I ain't either? |
|
|
![](templates/respond/images/spacer.gif) |
Mike Sweeney
From: Nashville,TN,USA
|
Posted 19 Apr 2007 3:48 pm
|
|
Colby,
The best thing I've found so far is Hopes counter top polish. You can get it at home depot. _________________ Zumsteel steel guitars, Telonics and Peavey amplifiers, GHS strings. |
|
|
![](templates/respond/images/spacer.gif) |
A. J. Schobert
From: Cincinnati, Ohio,
|
Posted 19 Apr 2007 3:48 pm
|
|
New mica would help. |
|
|
![](templates/respond/images/spacer.gif) |
john widgren
From: Wilton CT
|
Posted 19 Apr 2007 5:31 pm
|
|
Hey Jay,
For fine scratch removal try Novus plexiglass cleaner and polish. They also make scratch remover in three grades of abrasiveness, but I would not go much past the mildest..I think its #1...anyway google Novus...JW |
|
|
![](templates/respond/images/spacer.gif) |
john widgren
From: Wilton CT
|
Posted 19 Apr 2007 5:32 pm
|
|
PS : and be REALLY careful not to rub through... |
|
|
![](templates/respond/images/spacer.gif) |
Larry Jamieson
From: Walton, NY USA
|
Posted 19 Apr 2007 7:24 pm
|
|
Hey Jay,
For cleaning pickguards on guitars, and other finish cleaning, I use Dupont swirl mark remover, available at most auto parts stores. It is a very mind rubbing compound. Use light pressure, be sure not to rub through the color...
Good luck!
Larry J. |
|
|
![](templates/respond/images/spacer.gif) |