Profex hook-up to NV 112 question

Stewart Thompson · From: Puyallup, WA.

I did a search and couldn't find anything on what the preferred method to connect a profex to the NV112 is? On my NV400 I run profex left and right OUT >>> NV400 inputs 1&2 on the front of the amp. Thanks!
_________________
Stew

Jack Stoner · From: Kansas City, MO

If that is how you are doing it on the NV400 you can do the same thing on the NV112.

Richard Durrer · From: Alberta, Canada

I run a Profex I into my Nashville 112 by using the following setup. Pedal steel to vol pedal. Vol pedal to the Hi Input of the N112. Then I run the Post EQ send to the Profex Input. The left output of the Profex goes into the Post EQ Return. I use the Profex at this time mostly for delay, but I am extremely pleased with it and the N112.
_________________
1999 Carter D10 (9x8),Digitech RP150,Hilton Volume Pedal,Roland Cube 80XL,Nashville 112,BJS Bar

Forum Index > Electronics		Next oldest topic :: Next newest topic

All times are GMT - 8 Hours	Jump to: