| Author |
Topic: fender vol pedal |
Bob Ritter
From:
pacfic, wa
|
|
|
 |
Bob Ritter
From:
pacfic, wa
|
Posted 7 Feb 2007 12:06 pm |
|
which one is the correct one we use the top one...I though the part # was ka5041s32 but they list a ka5041s28...is there any difference precision electronic componets in canada is the manufacturer on the digikey website
KA5041S28-ND KA5041S28 POT 500K OHM 2W LOG TAPER Precision Electronic Components Ltd. 500K 2 W Single 1.12" (28.45mm) Round Panel Mount Bulk Side Adjustment ±10% K 49 10.22000
_________________
Let's go catch a steelhead |
|
|
|
Lee Jeffriess
From:
Vallejo California
|
Posted 8 Feb 2007 10:42 pm
|
|
Bob, try the Dunlop 470K, its an audio taper.
I have had one in my Fender vol/tone pedal for just shy of 2 years now, with no sign of messing up.
I cant say the same for the PECs, I never had one last more than 9/10 months.
I think Tom Bradshaw has them or try tubesandmore.com .
Lee |
|
|
|
Joseph Solomon
From:
Newtown, Pennsylvania, USA
|
Posted 9 Feb 2007 1:13 pm Fender Volume Pedal
|
|
| I also use a Fender Volume Peda. I replaced the pot with one I purchased from Tom Bradshaw, and it works great. |
|
|
|
