| Author |
Topic: Scratched tone bar |
Andrea Tazzini
From:
Massa, Italy
|
Posted 16 Jan 2007 9:56 am |
|
Hallo Steelers,
my tone bar fell on the floor (rough stones) and it is scratched,
how can I polish it ?
Thank You,
Andrea |
|
|
 |
Terry VunCannon
From:
Greensboro, North Carolina, USA
|
Posted 16 Jan 2007 10:22 am
|
|
| I have had luck with a bar droped on brick by using a buffing wheel...go real slow & take your time. |
|
|
|
Les Anderson
From:
The Great White North
|
Posted 16 Jan 2007 10:40 am
|
|
| Buy a small can or jar of a "top quality" metal polishing compound. You can polish your bar until it shines like a brand new chrom bar once again. |
|
|
|
Gary Lynch
From:
Creston, California, USA
|
Posted 16 Jan 2007 10:51 am
|
|
| It depends on how bad the 'scratch' really is and what the bar is coated with, or not. Good luck. |
|
|
|
Howard Tate
From:
Leesville, Louisiana, USA, R.I.P.
|
Posted 16 Jan 2007 12:47 pm
|
|
| I used "Mothers Mag and Aluminum Polish". I put a dab on a buffing wheel on my grinder, it did pretty well. Probably any rubbing compound or jewelers rouge will work. |
|
|
|
Alan Brookes
From:
Brummy living in Southern California
|
Posted 17 Jan 2007 5:37 pm
|
|
| I'm not so sure small scratches do much to the sound of a bar. I use them till they're scratched up as hell and then buy a new one. |
|
|
|
Keith Cordell
From:
San Diego
|
Posted 17 Jan 2007 8:40 pm
|
|
I generally toss 'em, but I have a new product I'll be coming out with soon that'll make you all very happy...
But I ain't saying what yet... |
|
|
|
Don Kona Woods
From:
Hawaiian Kama'aina
|
Posted 18 Jan 2007 12:21 am
|
|
Rather than scratches, I have a hairline crack developing. It is still smooth over the surface, but can anything be done?
Aloha, 
Don |
|
|
|
