| Author |
Topic: Sho-Bud wiring help needed. |
Barry Gaskell
From:
Cheshire, UK
|
Posted 3 Jan 2007 2:49 pm |
|
Hi
Can anyone out there help me with a wiring diagram for a Sho-Bud pro III twin ten. There's standard pick-up on the 9th neck and a George L on the C6th neck. It had been changed to a Loafer type of guitar and I'm restoring it back to a twin. It has a miniature 3 postion switch which I think it's a DPDT.
I sure would appreciate any help or advice or any problems I might face.
Thanks in anticipation.
Barry |
|
|
 |
Ricky Davis
From:
Bertram, Texas USA
|
Posted 4 Jan 2007 7:46 am Shobud Wiring
|
|
Ok this is what I got.
This is for the split coil shobuds...but all you have to do is forget the Red wire; and the white wire goes on the switch where the wire was coming from the coil tap switch, and the black groud wire is the same.
Ricky
_________________
Ricky Davis
Email Ricky: sshawaiian2362@gmail.com |
|
|
|
Barry Gaskell
From:
Cheshire, UK
|
Posted 4 Jan 2007 5:12 pm Sho-Bud rewire.
|
|
Hi Ricky
Thanks for responding.
My sho-Bud only has a neck switch and input jack. It's a pro III
with the straight levers and the hex crosshafts. The previous owner has really messed up the wiring when he turned it into a loafer type so I'm trying to restore it to original. The 9th neck has a sho-bud single coil with a black and white lead. The 6th neck has a George L with black red and earth lead.
The switch that was with it was I think a DPDT (Double pole double throw) switch. I'd be quite happy with it set up as a simple neck switch treating the George L as a single coil.
I hope that makes sense.
I appreciate your time and efforts.
Many Thanks
Barry |
|
|
|
