| Author |
Topic: Tunings |
Ron Farrar
From:
New Zealand
|
Posted 23 Feb 2006 11:00 am |
|
Hi all
Can anyone tell me the tunings on Bobbe Seymors three neck Bigsby ?
Thanks
Ron |
|
|
 |
Todd Clinesmith
From:
Lone Rock Free State Oregon
|
Posted 23 Feb 2006 11:17 am
|
|
Bobbe posted this not too long ago on some recent Bigsby thread. I belive they were all versions of C6th. One with an F on the 8th ( bass) one with a low G ...and the 3rd neck was C6th with the high G...which he said he did not use very often. This is all off the top of my head...so I would try searching the archives for the past 3 months under Bigsby or Bobbe Seymour.
Todd |
|
|
|
Ron Farrar
From:
New Zealand
|
Posted 23 Feb 2006 2:57 pm
|
|
| Thanks for that Todd |
|
|
|
John Bechtel
From:
Nashville, Tennessee, R.I.P.
|
Posted 23 Feb 2006 6:35 pm
|
|
The last time I stopped at Bobbe's store/shop that's just about what I observed, except that none of the necks had the high (G) that I can recall! Just a few variations on some of the bass-strings.
------------------
“Big John”
a.k.a. {Keoni Nui}
’05 D–10 Derby
’65 Re-Issue Fender Twin–Reverb Custom™ 15”
Current Equipment
|
|
|
|
Ron Farrar
From:
New Zealand
|
Posted 27 Feb 2006 10:57 am
|
|
John
You may or may not be interested but in New Zealand Big John in the local tounge is Hone Nui with Hone being pronounced like honey with a bit of expresion on the "o" as in or.
Ron |
|
|
|
