| Author |
Topic: Webb Amp Problem. Who Can Service Webb Amps? |
Glenn Porter
From:
Texas
|
Posted 25 Oct 2006 2:36 pm |
|
My Webb 6-14E speaker distorts.
Who can service Webb Amps.
Thanks,
Glenn |
|
|
 |
Phillip Lee Thompson
From:
Canby, Oregon
|
Posted 25 Oct 2006 3:02 pm
|
|
Hey Glenn,
He is a bit of a way from you,but call or e-mail JOHN LEMAY of Tucson Arizona. He's one of the best around.
His land line is -- 520---825 - 7218.
E-mail ---- miracleaud@aol.com
Hope this helps, Phil Thompson.
|
|
|
|
Glenn Porter
From:
Texas
|
Posted 25 Oct 2006 3:15 pm
|
|
Thanks Phillip
I called John, and he asked that I get in touch
with Tom Bradshaw.
I have sent Tom an email.
Thanks,
Glenn |
|
|
|
Randy Gilliam
From:
San Antonio, Texas, USA
|
Posted 27 Oct 2006 2:36 pm
|
|
| Glenn my Webb did the same thing I found out it Was a Weak Battery In my Volume Pedal? Hope This helps. Randy. |
|
|
|
Phillip Lee Thompson
From:
Canby, Oregon
|
Posted 27 Oct 2006 3:22 pm
|
|
Glenn :
Good reply on the weak battery in your volume pedal--I forgot all about that,but it did happen to me also. The other thing to check is your FUSE -- make sure it is not coroded or damaged. Radio Shack has fuses for your Webb. Phillip. |
|
|
|
Will Aytes
From:
Bartow, Florida, USA
|
Posted 28 Oct 2006 1:54 am
|
|
I took my Webb 6 14-E to my local Peavey service center for a all around service here in sunny downtown Winter Haven Florida. Did a great job. Carlton Music Center 863-294-4216 is there # and ask for the service Dept.
Good Luck |
|
|
|
Mike Fried
From:
Nashville, TN, USA
|
Posted 28 Oct 2006 8:44 am
|
|
| Any competent amp tech should be able to service your Webb, as they're pretty straightforward. Your distortion problem is very likely caused by the EQ in/out toggle switch, a very common problem with that amp. You can try "working" the switch a number of times and see if it affects the problem. If it does, the switch needs replacing, as the contacts are oxidized or pitted. Even if working the switch clears it up for awhile, the problem will likely come back unless it's replaced. |
|
|
|
Hiro Keitora
From:
New York, New York
|
Posted 28 Oct 2006 9:07 pm
|
|
Also, ( thou I don't know how old your amp is,) check that "reverb" connection to the chasis. Go ahead and do that "plugging in, plugging out" type of working in.
All that shorting switch like input jacks and speaker jacks, are good place to clean up.
|
|
|
|
