| Author |
Topic: Peavey Footcontroller and new cable, 3 to sell |
Ken Fox
From:
Nashville GA USA
|
Posted 7 Oct 2005 7:49 am |
|
I have three of these for sale and they will have new 25 foot midi cables from Peavey (cost me $30.00 each, ordered three today).
These will be available in a week. Let me know if you are in need! I sold my last one on Ebay for $99.00 and freight!
I need $90.00 each for the footswitch and cable plus freight.
There is much you can do with these for a Profex 2 and Bassfex (same unit as a Profex 2). It allows you to see same digital read out, scroll thru banks of settings, and turn on/off individual effects in the chain!
I like to take a nice clean setting then add distortion. I then toggle it off and save the patch with it off! Every time I come back to that setting it is clean and a red light shows that the distortion is off. I just toggle it in as needed with the footswitch. All other effects that are on have a green led, turns red when you switch off the effect.
|
|
|
 |
Bob Martin
From:
Madison Tn
|
Posted 7 Oct 2005 7:07 pm
|
|
Ken are these the same floor units that go with the peavey transfex pro 212 if so will they now turn on and off different effects in the chain in my amp? I know that they didn't when I first got mine but hopefully there is an update to let them do this?? Thanks
Bob |
|
|
|
Ken Fox
From:
Nashville GA USA
|
Posted 8 Oct 2005 4:29 am
|
|
No these are specific to the Bassfex and Profex 2. I believe you need the PFC-10 foot controller
The PFC-10 also works for the Tubefex and Transtubefex. With a version upgrade to the PFC-10 and the Tubefex or Transtubefex (version 2.0) the ability is gained to toggle effects on and off. I would thing that same upgrade would be available for your amp. It also includes new stickers/decals to apply to the PFC-10 in the kit. Check with Mike Browm at Peavey Customer Service at 1-877-732-8391
[This message was edited by Ken Fox on 08 October 2005 at 05:33 AM.] |
|
|
|
Jim Price
From:
Grafton, Wisconsin, USA
|
Posted 8 Oct 2005 4:46 am
|
|
Ken
Do your controllers come with the power source? If so, that truly is a great deal and I'll take one. It'd be great if you know the whereabouts of a manual as well.
JP |
|
|
|
Ken Fox
From:
Nashville GA USA
|
Posted 8 Oct 2005 6:56 am
|
|
| The Peavey cable provides power to the unit via the 8-pin cable. no need for a wall wart at all. I do have two extra wall warts and will throw one in if you want! I have tried the foot-controller with a 5-pin midi and a wall wart, not the same! You do not get all the controls (can't turn effects on/off) with a 5 pin midi. [This message was edited by Ken Fox on 08 October 2005 at 07:56 AM.] |
|
|
|
Bob Martin
From:
Madison Tn
|
Posted 8 Oct 2005 10:15 am
|
|
Thanks Ken, thats great.
Bob |
|
|
|
Ken Fox
From:
Nashville GA USA
|
Posted 8 Oct 2005 11:58 am
|
|
One is sold. Two left! I will have the new cables here by next Friday, hopefully.
I have the manual in PDF format for anyone that wants it. Glad to email it out.[This message was edited by Ken Fox on 08 October 2005 at 01:00 PM.] |
|
|
|
Ken Fox
From:
Nashville GA USA
|
Posted 14 Oct 2005 12:01 pm
|
|
| Just got the new cables in from Peavey and these are controllers are ready to ship. |
|
|
|
Ken Fox
From:
Nashville GA USA
|
Posted 19 Oct 2005 1:14 pm
|
|
I have one used 8 pin Peavey midi cable for sale, too. Works for Tubefex, Transtubefex, Session 2000, Transformer amps, Tran-fex Pro and other amps using the 8 pin cable for foot/hand controllers
$20.00 shipped ($30.00 for a new one at Peavey).[This message was edited by Ken Fox on 19 October 2005 at 02:15 PM.] [This message was edited by Ken Fox on 19 October 2005 at 05:40 PM.] |
|
|
|
Ken Fox
From:
Nashville GA USA
|
Posted 27 Oct 2005 10:54 am
|
|
| Please close, moved to Ebay! |
|
|
|
John Rickard
From:
Phoenix (It's A Dry Heave) AZ
|
Posted 27 Oct 2005 11:53 am
|
|
 [This message was edited by John Rickard on 27 October 2005 at 01:48 PM.] |
|
|
|
