| Author |
Topic: Parts: bellcranks/puller arms |
Bill Moore
From:
Manchester, Michigan
|
Posted 28 Dec 2004 2:12 pm |
|
I had a chance to experiment with a small milling machine and these are the parts I made. I really don't have any need for them.
They're generic puller arms [bellcranks?] they will fit a 5/16th" square shaft. The rod holes are large enough for a 1/8th rod. Each one has a stainless steel cap screw. They are all slightly different, I didn't try to make them exactly the same. And they could use a litte polishing. There are 17 in all, probably enough for an S-10 guitar. 35.00 and a couple of bucks for postage. |
|
|
 |
Gary Shepherd
From:
Fox, Oklahoma, USA
|
Posted 28 Dec 2004 4:24 pm
|
|
Was this your own milling machine? Is it a CNC mill or the crank-your-own type? I've been looking into building a CNC machine for myself to build some parts.
If that's your machine, how would you feel about milling some parts for me?
------------------
Gary Shepherd
Sierra Session D-10
www.16tracks.com
|
|
|
|
Bill Moore
From:
Manchester, Michigan
|
Posted 28 Dec 2004 5:12 pm
|
|
Gary, it wasn't my machine, I'm not a machinist. It was a small manual "mini mill", they cost about 400.00. I made these as sort of educational project, to learn a little about this work. A pro could have done a much nicer job, but I'm sure these are totally funtional.
I did learn quite a bit, and spent enough time at it to figure out some of the basics. I just thought there might be someone out there who could use these.
Sorry I can't help you.
Bill |
|
|
|
Jerry Roller
From:
Van Buren, Arkansas USA
|
Posted 28 Dec 2004 6:41 pm
|
|
Bill, I would like to have the bellcranks you made. I sent you an email.
Thanks, Jerry |
|
|
|
Farris Currie
From:
Ona, Florida, USA, R.I.P.
|
Posted 28 Dec 2004 10:08 pm
|
|
Nice job Bill,man thats a lots of work,and for that price you sure want get rich!!!
farris |
|
|
|
Bill Moore
From:
Manchester, Michigan
|
Posted 29 Dec 2004 4:12 am
|
|
Thanks Farris, I appreciate the kind words. The parts have been sold. This can be closed.
Bill |
|
|
|
Rich Cottle
From:
Sacramento California
|
Posted 30 Dec 2004 3:56 pm
|
|
| Hi Gary,I make parts,what kind of parts do you need, Rich |
|
|
|
