| Author |
Topic: Out West Steel Case for Pro III |
Tommy Minniear
From:
Logansport, Indiana
|
Posted 11 Oct 2004 10:31 am |
|
"New" - "Never Used" - Out West Standard Pedal Steel Guitar Case. This case was built by Wayne Brown for a Sho~Bud Pro III. I sold the guitar before the case arrived. It originaly had wheels and a handle on the opposite end that I have removed and am using on one of my other cases. These are very well built cases that would give your guitar years of good solid protection. It could be altered with foam for a steel with a smaller cabinet. Price: $150.00 + UPS shipping from 46947. Click on the button above and email with any questions you have.
------------------
Tommy Minniear
www.ntsga.com
www.cajunsteelguitar.com
|
|
|
 |
Brian Davis
From:
San Francisco, USA
|
Posted 12 Oct 2004 6:41 am
|
|
| What are the dimensions of the space inside where the steel rests? |
|
|
|
Tommy Minniear
From:
Logansport, Indiana
|
Posted 12 Oct 2004 9:10 am
|
|
There are two rails that run the length of the cavity inside the case that create the place for the steel to rest when placed in the case. The cavity that these rails create measures: 11 3/4" x 34 1/4".
The actual measurements of the cavity where the steel fits when the case is opened is 35" x 13 3/8". There is a divider that creates a cavity for the pedal bar - legs and rods pouch to fit: 3 7/8" wide.
With a little time, effort, and ingenuity the rails and pedal bar divider could be moved to accomodate a guitar with a smaller cabinet
Hope this helps.
------------------
Tommy Minniear
www.ntsga.com
www.cajunsteelguitar.com
|
|
|
|
Tommy Minniear
From:
Logansport, Indiana
|
|
|
|
