| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic Buddy's Stool
Goto page 1, 2  Next
Reply to topic
Author Topic:  Buddy's Stool
Jeremy Threlfall


From:
now in Western Australia
Post  Posted 21 Sep 2006 7:56 pm    
Reply with quote

Hi, I'm considering purchasing a seat or stool to replace the wooden box I sit on to play.

Pack seats seem like a really good idea, but I have noticed from some pictures that Buddy Cage uses a round stool on tripod legs, with a tractor style moulded seat. It appears that it would be easy to swivel on a little bit, if that is a desirable thing to do.

Anyone else have swivelling stool?. Is this a pedal steel dedicated bit of gear, or is it a simple general purpose/bar stool or drummers throne do you think?

Jeremy

Carter Starter/Blues Deluxe
View user's profile Send private message Send e-mail
Andy Sandoval


From:
Bakersfield, California, USA
Post  Posted 21 Sep 2006 8:18 pm    
Reply with quote

Hi Jeremy, I considered a round swivel style stool like what drummers use until I saw one of these. It's got three height adjustments and folds up nice and compact too.


check out the Pro Steel Guitar Bench available from Carter Guitars.
View user's profile Send private message Send e-mail Visit poster's website
Paddy Long


From:
Christchurch, New Zealand
Post  Posted 21 Sep 2006 8:47 pm    
Reply with quote

A Pac-seat would be much more use to you as it has so much storage space for all your bits and pieces etc... !
View user's profile Send private message Send e-mail
Andy Sandoval


From:
Bakersfield, California, USA
Post  Posted 21 Sep 2006 9:08 pm    
Reply with quote

I considered a "pack a seat" also but as I don't gig with my steel and just play for my own enjoyment at home so the Pro Seat works just fine for me. Also, isn't the "pack a seat" a non adjustable height?

[This message was edited by Andy Sandoval on 21 September 2006 at 10:13 PM.]

View user's profile Send private message Send e-mail Visit poster's website
Jim Sliff


From:
Lawndale California, USA
Post  Posted 21 Sep 2006 9:24 pm    
Reply with quote

Andy - the ones I looked at were too tall for me (I'm 6'4") - I can't sit on one and still fit under a guitar, even with an extension kit.

[This message was edited by Jim Sliff on 09 November 2006 at 05:48 AM.]

View user's profile Send private message Send e-mail
Twayn Williams

 

From:
Portland, OR
Post  Posted 21 Sep 2006 9:40 pm    
Reply with quote

No one knows how to sit comfortably like a drummer. Get a good quality drum throne with lumbar support, your backside will thank you.
View user's profile Send private message Send e-mail
Jeremy Threlfall


From:
now in Western Australia
Post  Posted 21 Sep 2006 9:41 pm    
Reply with quote

Thanks for your replies, fellas

Does anyone value the swivel capability of a stool as opposed to a bench or seat?

View user's profile Send private message Send e-mail
Cliff Kane


From:
the late great golden state
Post  Posted 22 Sep 2006 12:11 am    
Reply with quote

I used a drum throne for a long time (don't call it a stool, drummers get mad when you say that ), and it was fine. I also had one of those folding benches, but that was too heavy and big (fine for at home). However, I recently got an old pack-a-seat that came with a guitar, and I couldn't see using anything else. It is very cool being able to keep and carry everything and anything in one case that works as a seat, too. What a great idea!

[This message was edited by Cliff Kane on 22 September 2006 at 01:13 AM.]

[This message was edited by Cliff Kane on 22 September 2006 at 01:13 AM.]

View user's profile Send private message Send e-mail Visit poster's website
David L. Donald


From:
Koh Samui Island, Thailand
Post  Posted 22 Sep 2006 1:55 am    
Reply with quote

I have the same bench Andy has, works fine.
But I also must have a bag for gear.

Eventually I want a pack a seat for
hauling in a smaller set of packages.
View user's profile Send private message Send e-mail Visit poster's website
Jon Light


From:
Saugerties, NY
Post  Posted 22 Sep 2006 3:01 am    
Reply with quote

Drum thrones are great----comfortable, solid, height adjustable. The swivel doesn't present any sort of problem but I wouldn't say that it's an asset---my butt swivels fine without any need of mechanical assistance. However....drum thrones are fairly heavy and bulky. While a packaseat pays for its bulk by carrying a bunch of stuff inside, the throne carries nothing and will only fit in a rather large duffel type bag--the folded legs are pretty long and the seat is a very large awkward shape. After a couple of years I gave up on the throne in the interest of gig-transport practicality. I now have a packaseat and also, as an alternative for hit & run urban warfare gigs, a very lightweight folding chair that I customized with hardware (plumbing supplies) for height that I bungee to the guitar case. Very practical although not as luxurious for my aching butt as the other options.
View user's profile Send private message Send e-mail Visit poster's website
Jack Stoner


From:
Kansas City, MO
Post  Posted 22 Sep 2006 3:20 am    
Reply with quote

Throughout the years, I've used just about everything - chairs, stools, drummer thrones, backless pak-a-seat, etc. It wasn't until I built my own pak-a-seat with a backrest that I was happy.

The swiveling seat is not an asset for pedal steel - you want a seat that does not move.
View user's profile Send private message Send e-mail
J D Sauser


From:
Wellington, Florida
Post  Posted 22 Sep 2006 3:43 am    
Reply with quote

I prefer drummer stools... triangular.
Looks better to me as a pack a seat too.
As I was playing universals, I needed the loberty to move my legs freely without repositioning my seat.

... J-D.
View user's profile Send private message Send e-mail Visit poster's website
Jim Cohen


From:
Philadelphia, PA
Post  Posted 22 Sep 2006 4:08 am    
Reply with quote

Quote:
Buddy's Stool
Whew. When I saw this title, I thought it was going to be a medical thread...
View user's profile Send private message Send e-mail Visit poster's website
Jim Sliff


From:
Lawndale California, USA
Post  Posted 22 Sep 2006 4:44 am    
Reply with quote

Somewhere in a prevous thread I mentioned that I use a roling toolbox from Home Depot - handle on one end, wheels on the other, around 17-18 inches in height (depending on the model). They carry a ton of stuff - I've used one as my guitar gig box for years. Now I still do that, and stick a cusion on it for a steel seat. It's the right height for me with my GFI and Fenders with no extension kit, and the extension handle and wheels makes it far more practical than a Pack-a-Seat.

You can see it sitting between the two Fenders, and in front of my computer. It looks kind of like the handle is stickin up in the picture, but it's not - it's recessed. It's actually fine to use as-is, but a pillow (stored inside easily) makes it a bit more comfortable. To me, it's far more useful and WAY less expensive than a Pack-a-Seat:

[This message was edited by Jim Sliff on 22 September 2006 at 05:46 AM.]

View user's profile Send private message Send e-mail
Bill Hatcher

 

From:
Atlanta Ga. USA
Post  Posted 22 Sep 2006 4:55 am    
Reply with quote

I like the toolbox idea Jim.
View user's profile Send private message Send e-mail
Ken Williams


From:
Arkansas
Post  Posted 22 Sep 2006 5:10 am    
Reply with quote

Before I got my first pack-a-seat, I used to sit on the drummer's bass drum case. It was the right height and not too uncomfortable if the show wasn't too long. Anyway, it was much better than folding chairs and such.

Ken
View user's profile Send private message Send e-mail Visit poster's website
Nic du Toit


From:
Milnerton, Cape, South Africa
Post  Posted 22 Sep 2006 6:13 am    
Reply with quote

...Nearly stepped in it

------------------
Nic du Toit
1970 P/P Emmons D10 Fatback 8x5
Peavey Session 500 unmodfied

Click on the images to go to the CD's
Click here for Nic's other projects
Click here to E-mail us.



View user's profile Send private message Send e-mail Visit poster's website
Bill Ford


From:
Graniteville SC Aiken
Post  Posted 22 Sep 2006 6:22 am    
Reply with quote

Jeremy,
Go to Harborfreight.com and type in [seat]they have a couple of seats with the "tractor seat" style that you mentioned.

BF
View user's profile Send private message Send e-mail
Barry Blackwood


Post  Posted 22 Sep 2006 10:01 am    
Reply with quote

Hey Cliff, stool, stool, stool.
View user's profile Send private message Send e-mail
Jon Light


From:
Saugerties, NY
Post  Posted 22 Sep 2006 10:28 am    
Reply with quote

Stop teasing the drummers, Barry. It just makes them play louder.
View user's profile Send private message Send e-mail Visit poster's website
Cliff Kane


From:
the late great golden state
Post  Posted 22 Sep 2006 12:11 pm    
Reply with quote

A drummer actually said to me: "It's not a stool! It's a throne!"

I told him: "A stool is a stool by any other name."
View user's profile Send private message Send e-mail Visit poster's website
Jon Light


From:
Saugerties, NY
Post  Posted 22 Sep 2006 12:36 pm    
Reply with quote

STOOL





THRONE




View user's profile Send private message Send e-mail Visit poster's website
Bob Kagy

 

From:
Lafayette, CO USA
Post  Posted 22 Sep 2006 1:19 pm    
Reply with quote

Jon, you kill me.

I used a drummer's throne for a long time - until I got more knee levers and found out that with certain pedal/knee combinations I'd do an uncontrollable pivot, losing the string grip, bar or both.

Now I go for a stable platform that gives me leverage.
View user's profile Send private message Send e-mail
Ken Lang


From:
Simi Valley, Ca
Post  Posted 22 Sep 2006 6:21 pm    
Reply with quote

Jim. That rolling toolbox is a great idea for a gig case. I have one at home but I use it for (gasp) tools. If I were gigging regularly like the old days, I'd go grab another. It sure beats suitcases of gear that you have to carry.

Maybe I'll pick up another for just in case.
View user's profile Send private message Send e-mail
Mike Shefrin

 

Post  Posted 22 Sep 2006 6:25 pm    
Reply with quote

Laughing

Last edited by Mike Shefrin on 12 Jan 2010 11:42 am; edited 1 time in total

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron