| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic Stringmaster date range by logo plate
Reply to topic
Author Topic:  Stringmaster date range by logo plate
Bill Quinn

 

Post  Posted 24 Dec 2005 7:12 am    
Reply with quote

Is there a date range for stringmasters with the style of metal Fender Logo plate as on this one on EBay? The seller says it is 53-55.
I have a junk spray painted two neck body I had refinished that has the same plate, but the penciled dating in the tuner cavity was obscured.
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=7376932 481&rd=1&sspagename=STRK%3AMEWA%3AIT&rd=1#ebayphotohosting


Thanks and Happy Holidays

[This message was edited by Bill Quinn on 24 December 2005 at 07:12 AM.]

View user's profile Send private message Send e-mail
Andy Sandoval


From:
Bakersfield, California, USA
Post  Posted 24 Dec 2005 7:46 am    
Reply with quote

The tuners and "Tele" type pickup switch indicates to me that this guitar is closer to a post 60's model. Also, I don't think they had the blender control in the early 50's.

[This message was edited by Andy Sandoval on 24 December 2005 at 08:16 AM.]

View user's profile Send private message Send e-mail Visit poster's website
Erv Niehaus


From:
Litchfield, MN, USA
Post  Posted 24 Dec 2005 8:16 am    
Reply with quote

That Stringmaster is not from 53-55. The Stringmasters from this era had chrome covered pickups (smaller) and little slider neck switches. Also, the tuners were "lollypop" style.
Erv
View user's profile Send private message Send e-mail
Richard Shatz


From:
St. Louis
Post  Posted 24 Dec 2005 10:44 am    
Reply with quote

The case corespond to mid 50s specs.
View user's profile Send private message
Nick Reed


From:
Russellville, KY USA
Post  Posted 24 Dec 2005 12:32 pm    
Reply with quote

Several hard to find parts needed for this ebay Stringmaster. The bridge covers appear to be missing, the diamond covers, and it would probably need all new tuning keys because of the one missing plus the corrosion & rust included at no extra charge. This guitar would also need a new paint-job to cater to my tastes.

After you pay shipping, I don't think I'd want much more than the starting bid price invested in it.


Linda's Stringmaster looked every bit as rough as that one when we got it. . . . but it did have all the parts included. After new paint & polishing it cleaned up very nicely as you can see below. The only thing I've had to replaced was one original Fender Leg. I found that item this week thanks to Mr. Seymour. Merry Christmas everybody & happy bidding. Nick

[This message was edited by Nick Reed on 31 December 2005 at 10:43 AM.]

View user's profile Send private message Send e-mail
Rick Alexander


From:
Florida, USA, R.I.P.
Post  Posted 24 Dec 2005 3:16 pm    
Reply with quote

Nick's right - it's not really worth a whole lot more than the opening bid. It looks like it either got wet or left in a trunk. There are no close-ups of the tuners, but from what I can see they look a bit rusty. The busted tuner, rough finish and beat up case could indicate a hard life. Chances are it would need all new tuners. And if the guitar hardware is corroded, the legs might need new rings & collars or complete replacement. So the selling price might just be the beginning . .

BUT - if all those issues were dealt with, it would be one heck of a guitar.
View user's profile Send private message Send e-mail Visit poster's website
Gary Boyett

 

From:
Colorado/ Lives in Arizona
Post  Posted 24 Dec 2005 3:19 pm    
Reply with quote

It is a mid 50's for sure. I have one just like it (well, with more paint!)with a slightly higher serial number.

It probably plays great. These are the good ones!

View user's profile Send private message Send e-mail
Bill Quinn

 

Post  Posted 24 Dec 2005 5:14 pm    
Reply with quote

No, I wouldn't buy it either.
But I will post photos of the one I am building from parts when done. It looked way way worse than this one. Anyway, I think I answered my own original question - as an early 70s stringmaster has the same logo plate as the one on Ebay. This style plate must have been used up until at least that point.

[This message was edited by Bill Quinn on 24 December 2005 at 05:15 PM.]

View user's profile Send private message Send e-mail
Ron Brennan

 

From:
Orlando, Florida, USA; Formerly, Edison, NJ
Post  Posted 25 Dec 2005 7:09 am    
Reply with quote


To help date this guitar, I have a November "55" ........it has the blender controls, Push button neck selecter (DCool and the case is Fender Tweed with the leg storage compartment in the top half... I think, Fender went to the blade neck selector switch on or about "57" or "58"...Jody did a post on this not to long ago.

The main thing is that someone responsible, like Nick Reed is, get it and bring it back as best possible to its original state. Hope it happens.......TX
rgds,
Ron

------------------
JCFSGC member since 2005 "Be of Good Cheer"
"55" Stringmaster D8,"59" Stringmaster D6
"67" Telecaster,
"60"Fender Concert Amp 4-10's


View user's profile Send private message

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron