| Author |
Topic: Making a nut(?) What material? |
Don McClellan
From:
California/Thailand
|
Posted 27 Dec 2006 3:23 pm |
|
| Hi, I'm making a 12 string lap steel and I'm ready for the nut. What should I use? Does someone out there make them for sale? Thanks, Don |
|
|
 |
Gary Lynch
From:
Creston, California, USA
|
Posted 27 Dec 2006 3:37 pm
|
|
Being you live on the Islands, I would use a  macadamia nut [This message was edited by Gary Lynch on 27 December 2006 at 03:39 PM.] [This message was edited by Gary Lynch on 27 December 2006 at 03:39 PM.] |
|
|
|
Derrick Mau
From:
Honolulu, Hawaii, USA
|
Posted 27 Dec 2006 3:53 pm
|
|
| Brass |
|
|
|
Roy Ayres
From:
Riverview, Florida, USA, R.I.P.
|
Posted 27 Dec 2006 4:09 pm
|
|
Don,
Fender's guitar nuts are made from urea formaldehyde The material called melamine formaldehyde is very similar, and is the material that "Melmac" dishware is made from. If you can locate an old Melmac bowl with a thick bottom, it is ideal for making a nut.
------------------
Visit my Web Site at RoysFootprints.com
Browse my Photo Album and be sure to sign my Guest Book.
|
|
|
|
Nathan Hernandez
From:
Riverside, California, USA
|
Posted 27 Dec 2006 5:21 pm
|
|
| How is the guitar being constructed? |
|
|
|
Ron Victoria
From:
New Jersey, USA
|
Posted 27 Dec 2006 7:38 pm
|
|
| wouldn't a bone nut be good? |
|
|
|
Don McClellan
From:
California/Thailand
|
Posted 27 Dec 2006 11:33 pm
|
|
| Nathan, The guitar is being made out of tight grained fur. I know its not the most desirable wood for lap steels (and I don't know why) but I made an 8 stringer out of the same wood and its sounds great. It has a GeorgeL pickup and a brass bridge. The nut on my eight stringer is made of moose antler. Mooseses are hard to come by on Maui. If you've ever listened to any of the MP3s I've posted on NoPeddlers they were all done on the 8 stringer I made from fur lumber 2x4s. Thanks, Don |
|
|
|
Ron
From:
Hermiston, Oregon
|
Posted 1 Jan 2007 8:53 am
|
|
Most any hard plastic will work. Bakelite or brass. Corian counter top plastic is nice.
I make a roller nut from string ends. Go to robroguitar.com for a look.
Robro Ron |
|
|
|
Chuck Fisher
From:
Santa Cruz, California, USA * R.I.P.
|
Posted 6 Jan 2007 12:28 am
|
|
ivory is available on ebay, I like brass, its easy to work.
cf |
|
|
|
