| Author |
Topic: Mike Brown Deal Deltafex |
Brian Ainsworth
From:
Fishkill New York
|
Posted 18 Oct 2006 4:13 am |
|
| Hi Mike. How are you/ I just got a Dual Deltafex yesterday and need some help getting started.. What is the right way to hook this up? I'm hooking it into a Nashville 1-12.. Thanks for the help..... |
|
|
 |
Larry Custer
From:
Tennessee, USA
|
Posted 18 Oct 2006 5:03 am
|
|
| I got a daul deltafex myself,use with a Fender Steel king.hook the steel to the momo in,and hook the momo out to the amp.Mike said he uses settings 90 to 94 good for steel.i hope this helps. |
|
|
|
Mike Brown
From:
Meridian, Mississippi USA
|
Posted 18 Oct 2006 6:55 am
|
|
Thanks for the purchase of the Dual Deltafex guys. I recommend that you patch a cable from the POST EQ PATCH OUT on the 112 to the LEFT MONO input on the DD. Then, using a second cable, patch from the LEFT OUTPUT on the DD to the POST EQ PATCH RETURN JACK.
This places the DD after the equalization circuit of the 112, thus when the eq controls are adjusted on the 112, it changes the effect as well and this is what is preferred.
|
|
|
|
Brian Ainsworth
From:
Fishkill New York
|
Posted 18 Oct 2006 7:09 am
|
|
| Thanks for the help Guys... I had it plugged into the right side. I'll try it out tonight.. Thanks again.... |
|
|
|
Mike Brown
From:
Meridian, Mississippi USA
|
Posted 18 Oct 2006 5:11 pm
|
|
| To get the full benefit of a stereo processor such as the Dual Deltafex, two amps and speakers such as two Nashville 112's or 1000's would be best. |
|
|
|
Skip Cole
From:
North Mississippi
|
Posted 6 Dec 2006 2:14 pm
|
|
I guess it would work on a Nash 1K and a Nash 112 paired together , but how do you hook up the 2nd amp ; from volume pedal to both amps or one amp to the other. as you can tell i've never had the priviledge of running 2 amps before. Thanks for the help.
Skip 
------------------
"I Can Only Imagine"
|
|
|
|
Mike Wheeler
From:
Delaware, Ohio, USA
|
Posted 6 Dec 2006 3:07 pm
|
|
| The simplest way would be to do just as Mike B. explained in his first post. But, run a third cord out of the Right Output of the DD to the second amp's POST EQ PATCH RETURN JACK. This only uses the second amp's power amp and speaker, not it's preamp. |
|
|
|
Skip Cole
From:
North Mississippi
|
Posted 6 Dec 2006 8:02 pm
|
|
Thanks Mike W. for the info, i'll give it a try.
Skip
------------------
"I Can Only Imagine"
|
|
|
|
