| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic The Big Dog came home!
Reply to topic
Author Topic:  The Big Dog came home!
Ron Bednar


From:
Rancho Cordova, California, USA
Post  Posted 9 Nov 2004 9:14 am    
Reply with quote

My Lazy River baritone Weiss showed up at the doorstep yesterday. My initial impression was, "Wow, it's big!" Rance did a really nice job, it's very well put together, not too fancy but with clean well appointed lines. It's an attractive looking guitar. Walnut back and sides with a Spruce top and Maple binding, a Pau Ferro fretboard and bridge with an abalone rosette.
I asked him to ship without strings, so I put on a set of NewTone Alohas custom made for it and tuned it to A. My wife said it sounded to her like a grand piano. Those bass strings are BASS! It's surprisingly loud with a rich sound and loads of sustain. It's going to be amazing when it really opens up in 6 or 8 months. When I play it I can feel the vibrations in my gut. It definitely has a cello like sound...with some Harley Davidson thrown in. I'm going to experiment with strings and tunings to see what best turns it's crank. I'll have to learn some to do it justice, but so far I love it, what a sound! When I get it a bit more settled I'll post some sound clips and better pics. Here's a shot of it next to my reso for comparison sake:
http://www.dahothouse.com/music/2onwall.jpg

The neighbor kid asked if he could try it out, you can do all sorts of things with a giant Weiss:
http://www.dahothouse.com/music/wildweiss.jpg

[This message was edited by Ron Bednar on 09 November 2004 at 09:16 AM.]

View user's profile Send private message Send e-mail Visit poster's website
Jon Light


From:
Saugerties, NY
Post  Posted 9 Nov 2004 12:15 pm    
Reply with quote

Wow, that's....big. Actually I don't know any Weiss's personally so I have nothing to compare it with. I love super ornate stuff with multiple bindings and great perfling and rosettes and herringbone and abalone etc etc etc but I also love the quiet understated elegance of simple design.

Is the second photo your doing or did you clip that from somewhere? I'll have to take some of my axes into the bathtub with me to see if they are as buoyant as yours.
View user's profile Send private message Send e-mail Visit poster's website
Patrick Newbery

 

From:
San Francisco, California, USA
Post  Posted 9 Nov 2004 12:23 pm    
Reply with quote

You are not only a steeler, you also have some good photoshop chops!
View user's profile Send private message Send e-mail
Bill Blacklock

 

From:
Powell River, British Columbia, Canada
Post  Posted 9 Nov 2004 2:33 pm    
Reply with quote

Congratulations Ron, thats a real fine instrument you have there, looking forward to the sound clip. Let us know how the tunings work out. Is that a D shape taken down to A (151351). It might be many years before the novelty and inspiration from this one starts to wane.
Happy picken / Bill
View user's profile Send private message Send e-mail
Ron Bednar


From:
Rancho Cordova, California, USA
Post  Posted 9 Nov 2004 3:06 pm    
Reply with quote

Thanks guys. Yeap, that's what I do for a living and was just messing around one day. The surfer weiss is actually a 3D model rendered and comped into the image.

Bill - Yes, it's open A with the D form. It's pretty amazing playing around with it. Lots of experimenting to do, completely different from anything I am used to. But I'm starting to relax some with it today and feel out the tempo it likes and listening more to what it wants to say, if you know what I mean. On slow blues it's really gut wrenching, it moans those sad notes real well. A whole new thing to learn here, I need to slow down and really pay attention to my bar placement and listen to the note rather than look where I am. I'm loving it so far. Can't wait to see what you think of yours Bill, we can swap ideas.
View user's profile Send private message Send e-mail Visit poster's website
Jeff Au Hoy


From:
Honolulu, Hawai'i
Post  Posted 9 Nov 2004 3:10 pm    
Reply with quote

...

Last edited by Jeff Au Hoy on 13 Sep 2019 3:30 am; edited 1 time in total
View user's profile Send private message
Travis Bernhardt

 

From:
Vancouver, British Columbia, Canada
Post  Posted 9 Nov 2004 3:34 pm    
Reply with quote

Damn. I can't wait to hear what that sounds like (hint, hint...).

And how the heck did you do that surfer picture? I can think of a way to do it, but it's pretty labour intensive--all that spray...

-Travis
View user's profile Send private message Send e-mail
Rick Aiello


From:
Berryville, VA USA
Post  Posted 9 Nov 2004 4:01 pm    
Reply with quote

Ron, if ya think thats big (relatively speakin') ...

Wait'll ya see what I just sent to Jason L. ...

For your other project ...

PS: Super NICE Weiss

------------------



My wife and I don't think alike. She donates money to the homeless and I donate money to the topless! ... R. Dangerfield


View user's profile Send private message Send e-mail Visit poster's website
Andy Volk


From:
Boston, MA
Post  Posted 9 Nov 2004 4:20 pm    
Reply with quote

Wow. Weisszilla. But it's not the wand, Rick, it's the magician! Debashish B. is making a uke sized steel so now we can re-create the mandolin orchestra with an all-steel- guitar line up.
View user's profile Send private message Send e-mail Visit poster's website
Rick Aiello


From:
Berryville, VA USA
Post  Posted 9 Nov 2004 4:43 pm    
Reply with quote

Quote:
But it's not the wand, Rick, it's the magician!


Yep ... thats what all the Guys say ...

But eavesdrop on The Ladies ... and you get a whole different perspective of that situation ...

Anyway, this ain't no acoustic rig we're talkin' 'bout ...
View user's profile Send private message Send e-mail Visit poster's website
Ron Bednar


From:
Rancho Cordova, California, USA
Post  Posted 9 Nov 2004 5:33 pm    
Reply with quote

Andy - my wife agrees, she said, "it's not how long your weiss is, it's how you weiss long."

Rick - YAY! Jason called the other day and said you had finished the mags and it was about ready...glad we didn't route for it yet, it's bigger than expected!
View user's profile Send private message Send e-mail Visit poster's website
Bill Blacklock

 

From:
Powell River, British Columbia, Canada
Post  Posted 10 Nov 2004 12:49 pm    
Reply with quote

Ron, The baritone sounds great, it must have a hell of a growl to it on those lower frets. How did you make out for a case,
I just finished building a baritone case last week and its as solid as Queequeg's coffin, will send you some how to pictures if you need. Bill
View user's profile Send private message Send e-mail
Ron Bednar


From:
Rancho Cordova, California, USA
Post  Posted 10 Nov 2004 8:03 pm    
Reply with quote

Bill - That would be great to see that how to's. I'm using a gig bag that it just barely fits into right now.

Thanks!
View user's profile Send private message Send e-mail Visit poster's website

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron