| Author |
Topic: Fender volume pedal help! |
Tommy Dodd
From:
Acworth, Ga., USA (deceased)
|
Posted 18 Jun 2006 5:13 pm |
|
| I recently acquired two Fender volume pedals. These are the type with the swivel top that adjusts the tone. They look almost brand new but one of the pedals does not change the tone and I have discovered the capacitor is missing from the circuit. The other one does change the tone from bassier to normal amp setting (or more treble) but it does not do it gradually. It is more of an on/off type effect. Is this the correct way for the tone change to work? If any one knows the correct values for the components (the two potentiometers and a capacitor) I would greatly appreciate an email. ( tommyd@mindspring.com ) Or, if anyone might have a schematic diagram of this old classic volume pedal I would be very grateful for a copy. Thanks for all your help. |
|
|
 |
Bob Tuttle
From:
Republic, MO 65738
|
Posted 18 Jun 2006 5:21 pm
|
|
| Tommy, Check your mail. |
|
|
|
Garry Vanderlinde
From:
CA
|
Posted 29 Jun 2006 1:24 pm
|
|
Don't know if you still need it, but is this what you are looking for?
 |
|
|
|
Tommy Dodd
From:
Acworth, Ga., USA (deceased)
|
Posted 29 Jun 2006 4:00 pm
|
|
Thanks Garry, that was exactly that I neededl. Fortunately, another forumite already sent me a copy and the problem is solved.
You can lock this one up. Thanks again to all of you that responded thru email.
tommyd |
|
|
|
