| Author |
Topic: HELP!! My profex 1 |
Douglas Hudson
From:
Galena, Kansas, USA
|
Posted 6 Mar 2006 5:39 am |
|
Was playing yesterday afternoon (rehearsal with band) My profex one decided to crash on me. Keeps coming up with DSP interface error and says it is going to reset itself. When it does it still comes back to the DSP error.
Douglas Hudson |
|
|
 |
Darvin Willhoite
From:
Roxton, Tx. USA
|
|
|
|
Jeff Garden
From:
Center Sandwich, New Hampshire, USA
|
Posted 6 Mar 2006 8:28 am
|
|
| Sounds like a job for the profex doctor, Ken Fox....try e-mailing him at foxy229@alltel.net |
|
|
|
Mike Brown
From:
Meridian, Mississippi USA
|
Posted 6 Mar 2006 11:18 am
|
|
Douglas, we will be glad to review and repair your Profex I if you will send it to the factory. Our address is;
Peavey Service Center
Attn; Repair Department
412 Hwy. 80 East
Meridian, MS 39301
Please include a note of symptoms and a daytime phone number.
|
|
|
|
Douglas Hudson
From:
Galena, Kansas, USA
|
Posted 7 Mar 2006 5:33 am
|
|
Thanks Mike,
I will have this sent off soon.
Thanks everyone for your help.
Douglas Hudson |
|
|
|
Ken Fox
From:
Nashville GA USA
|
Posted 7 Mar 2006 5:34 am
|
|
| HOLD THE PLAY AND MIDI KEYS THEN POWER ON! This is the reset procedure. If that works, get rid of the battery and put in a battery-less mod chip! If it still has issues, you need to send it to Peavey for repair for sure. |
|
|
|
Douglas Hudson
From:
Galena, Kansas, USA
|
Posted 8 Mar 2006 7:02 am
|
|
Ken thanks. I just tried this and it came back up. Now I need to find a batteryless mod for a Profex 1. I am hoping this stays with me because it is the only decent preamp and effects unit I have at the time. Now back to reprogramming LOL.
Thanks
Douglas Hudson |
|
|
|
steve takacs
From:
beijing, china via pittsburgh (deceased)
|
Posted 8 Mar 2006 8:24 pm
|
|
| Douglas, just a suggestion: Have Ken Fox put the chip in to go batteryless and also have him restore the settings you want if they are Jeff Newman's. Ken is the consumate professional; he's worked on several of my Peavey units and they always worked perfectly. He is very reasonable too pricewise. steve t |
|
|
|
Douglas Hudson
From:
Galena, Kansas, USA
|
Posted 9 Mar 2006 5:55 am
|
|
I have arranged to have the unit sent to Ken next week for a chip placement. I have been able to reinitialize the unit and seems to be working and remembering what I have programmed into it. I have a gig this weekend so I am going to use it. If it does it again, during the gig I have a pod 2.0 as back up.
Thanks everyone!
Douglas Hudson |
|
|
|
