| Author |
Topic: Question for Mike Brown |
Palmer
From:
New Bern,NC,USA
|
Posted 19 Aug 2005 3:21 am |
|
| Mike, I have a NV 400 and can't get the preamp out to work. Any quick fixes I might check? Thanks, Jack. |
|
|
 |
John Daugherty
From:
Rolla, Missouri, USA
|
Posted 19 Aug 2005 5:03 am
|
|
| If the amp works,I have to assume that the signal is available at the preamp-out jack. Did you forget to turn up the gain control? Also,put some contact cleaner on a plug and plug it in the jack a few times. It could be dirty.........JD |
|
|
|
Mike Brown
From:
Meridian, Mississippi USA
|
Posted 19 Aug 2005 5:14 am
|
|
That is a hardwired jack, so check the connection to the jack. If you are obtaining signal through the speaker, the pre amp out jack should be working.
Mike Brown
Peavey Electronics Corporation |
|
|
|
LARRY COLE
From:
LANCASTER, OHIO, USA
|
Posted 19 Aug 2005 6:40 am
|
|
Someone could have switched the Preamp out and the Poweramp in jacks by mistake. The Poweramp in should have a switchable jack but I am not sure about the Preamp out. Mike would know.
------------------
Playing For JESUS,LC. WILLIAMS U12,SHO-BUD PRO1,CARVIN TL60,GIBSON LES PAUL CUSTOM,YAMAHA L-10A ACOUSTIC,ROLAND JW-50 KEYBOARD,G&L AND BC RICH BASS'S
|
|
|
|
