| Author |
Topic: Profex II Battery Eliminator sucessful!!! |
Ken Fox
From:
Nashville GA USA
|
Posted 21 Jan 2005 3:21 pm |
|
| Just finished a Bassfex and Profex 2. Both are up and running with the new chip. I will continue testing until tomorrow. So far they are perfect. As Peavey stated, if they did not a DSP error would occur right away. This has not happened. |
|
|
 |
Jim Harper
From:
Comanche, Oklahoma, USA * R.I.P.
|
Posted 21 Jan 2005 4:01 pm
|
|
| Thank,s Ken for a good job. We appreciate your help==Jim Harper |
|
|
|
James McPhail
From:
Oxford, MS, USA
|
Posted 21 Jan 2005 6:21 pm
|
|
Ken(or maybe Mike Brown), will the chip work in a Profex (not II)?
Thanks,
------------------
Unclecuz in Oxford, MS
Zum U12 7/5, Session 500, Nashville 112, Profex.
|
|
|
|
Lyle Bradford
From:
Gilbert WV USA (deceased)
|
Posted 21 Jan 2005 9:57 pm
|
|
| Let me know when I can send you a profex 2 for a chip Ken. |
|
|
|
Ken Fox
From:
Nashville GA USA
|
Posted 22 Jan 2005 6:28 am
|
|
| Not sure about the original Profex, I have never seen one! If it has the same chip as a Profex 2, then it should work. |
|
|
|
c c johnson
From:
killeen,tx usa * R.I.P.
|
Posted 22 Jan 2005 9:19 am
|
|
| let me know when I can send you my profex 2 and bassfex CC |
|
|
|
Ken Fox
From:
Nashville GA USA
|
Posted 27 Jan 2005 7:17 am
|
|
I have ten more chips on the way. The last two orders are all spoken for.
Looks like the end of those pesky batteries!
|
|
|
|
Ken Fox
From:
Nashville GA USA
|
Posted 3 Feb 2005 3:31 pm
|
|
I ordered another 30 chips. Let me know if you need one! So far I do not know if they will work in Profex 1 or an Ultraverb 2 unit.
If someone with a Profex one could call me, I will be able to check the memory chip and see if it is the same!
I am trying to get schematics for both as well.
[This message was edited by Ken Fox on 03 February 2005 at 03:32 PM.] [This message was edited by Ken Fox on 03 February 2005 at 03:35 PM.] |
|
|
|
Ken Fox
From:
Nashville GA USA
|
Posted 4 Feb 2005 7:02 am
|
|
| If every one that has contacted me follows up I then have 31 commited chips. That leaves me 9 for stock. |
|
|
|
Ken Fox
From:
Nashville GA USA
|
Posted 6 Feb 2005 6:50 am
|
|
| I have schematics ordered for the old Profex 1 and the Ultraverb 2. I will be seeing if the chip will work in those very soon. |
|
|
|
James McPhail
From:
Oxford, MS, USA
|
Posted 6 Feb 2005 8:27 am
|
|
Thanks Ken. JM
------------------
Unclecuz in Oxford, MS
Zum U12 7/5, Session 500, Nashville 112, Profex.
|
|
|
|
Ken Fox
From:
Nashville GA USA
|
Posted 13 Feb 2005 9:04 am
|
|
| I got the schematic for the original Profex, the memory is totally different than a Profex 2. No luck on the Ultraverb, got the wrong schematic sent. [This message was edited by Ken Fox on 13 February 2005 at 09:24 AM.] |
|
|
|
