| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic WW2 and post war gov V disks
Reply to topic
Author Topic:  WW2 and post war gov V disks
c c johnson

 

From:
killeen,tx usa * R.I.P.
Post  Posted 30 Oct 2004 2:57 am    
Reply with quote

In Korea in 1954-54 Dick Curless, the Rice Paddy Ranger was a DJ on AFRS in Taegu. Dick had a lot of these gov supplied disks with all types of music, radio shows etc which were supplied to the troops for entertainment. They were supplied with a windup phoograph and the disks looked like then metal. They were larger than an LP but ran at 78 rpm. Dick gave me some of these disks and thru the yrs I have tried to transfer them to 8 trax cassettes, cds etc but to no avail I put a mic next to the spkr and could get a little sound but no good. I have had local repairman in Leavenworth, Monterey, Frisco, Austin etc to tell me these can not be duplicated. I have a friend who would like to hear these disks so if any of you have ideas, sound off. CC
View user's profile Send private message
Scott Appleton


From:
Ashland, Oregon
Post  Posted 31 Oct 2004 7:42 am    
Reply with quote

This Phonograph was Mechanical with no battery or amplifier i assume? If it had a battery powered speaker it is possible to take the lead off the needle's output or the pre amp output and go to a pre amp
buffer then to a recorder other wise .. a recording engineer with knowlege of old phonographs could
possibly use a turntable that may work with that disk.
I wouldcheck with one of the major record producers like RCA or Columbia to see if they have a "vintage"
collection of these devices.
View user's profile Send private message Send e-mail
c c johnson

 

From:
killeen,tx usa * R.I.P.
Post  Posted 31 Oct 2004 9:23 am    
Reply with quote

Scott, the phonograph is mechcanical and people that know anything about windups are few and far between, One problem is the size of the disks. They are 18.5" across. They really sound good on the V phono. The "speaker" is in the tone arm holding the needle and is directly above the needle and measures 4.5" across. No hi-fi buts sounds good. I just haven't discovered yet hoe to transfer to cassts, etc. CC
View user's profile Send private message
Howard Tate


From:
Leesville, Louisiana, USA, R.I.P.
Post  Posted 31 Oct 2004 10:58 am    
Reply with quote

I wonder if you could attach a pickup from an electronic phonograph the the arm of the windup? If the disks are metal it may not work as the electronc pickups are magnetic. It might depend on the type of metal.
View user's profile Send private message Send e-mail Visit poster's website
c c johnson

 

From:
killeen,tx usa * R.I.P.
Post  Posted 31 Oct 2004 1:05 pm    
Reply with quote

Ive tried and and no sound to the recorder. Thanks anyway. CC
View user's profile Send private message
Scott Appleton


From:
Ashland, Oregon
Post  Posted 31 Oct 2004 6:41 pm    
Reply with quote

I am a recording engineer and thier are turntables that can take up to 20" discs. The web site I mentioned has a service which can copy these discs to CD. They use special software to remove clicks and pops as well.

------------------
Mullen S12 Almost Mooney
71 Tele, Regal 45
Sho Bud S10 NP
Line 6 Flextone 3 + JBL D130
View user's profile Send private message Send e-mail
c c johnson

 

From:
killeen,tx usa * R.I.P.
Post  Posted 1 Nov 2004 3:10 am    
Reply with quote

great info on that site. I will contact and hope for the best. Thanks. CC
View user's profile Send private message
Smiley Roberts

 

From:
Hendersonville,Tn. 37075
Post  Posted 1 Nov 2004 3:12 pm    
Reply with quote

I have about 100 "V" discs,that are ALL made of flexible vinyl. Some go back to 1948,& up to the mid '50's. They are,all,16" across. I have even seen some,that had a glass base,w/ an acetate coating on top. VERY fragile. I'm in the process of transferring them to CD.

------------------
  ~ ~

©¿© It don't mean a thang,
mm if it ain't got that twang.
www.ntsga.com


View user's profile Send private message Send e-mail
c c johnson

 

From:
killeen,tx usa * R.I.P.
Post  Posted 1 Nov 2004 3:54 pm    
Reply with quote

Mine appear to be metal all the way through. some have told me they were originally made this way due to rough handling in combat zones. At the first of the war in korea we had the metal ones and about the time of the Inchon landing we were getting the glass based which would break on sight. CC
View user's profile Send private message
Thomas Bancroft

 

From:
Matawan, New Jersey, USA
Post  Posted 1 Nov 2004 4:37 pm    
Reply with quote

Collector's Choice music has reissued many of the V discs on CD. Check them out!
View user's profile Send private message Send e-mail
Smiley Roberts

 

From:
Hendersonville,Tn. 37075
Post  Posted 2 Nov 2004 11:32 am    
Reply with quote

Thomas,
Do you have a link to "Collecter's Choice"?

------------------
  ~ ~

©¿© It don't mean a thang,
mm if it ain't got that twang.
www.ntsga.com


View user's profile Send private message Send e-mail
Thomas Bancroft

 

From:
Matawan, New Jersey, USA
Post  Posted 3 Nov 2004 5:57 am    
Reply with quote

www.ccmusic.com

[This message was edited by Thomas Bancroft on 03 November 2004 at 05:58 AM.]

View user's profile Send private message Send e-mail

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron