| Author |
Topic: Profex II/Pete Drake preset |
Mike Brown
From:
Meridian, Mississippi USA
|
Posted 25 Sep 2003 1:03 pm |
|
I used to have this original preset within my collection of presets, but I no longer have it. Apparently, this preset was deleted along the way. Can anyone help me with the parameters of this preset? Output levels and all.
Or, you can call me toll free in North America at 1-877-732-8391.
Thanks,
Mike Brown
Peavey Electronics Corporation
|
|
|
 |
Charlie Moore
From:
Deville, Louisiana, USA
|
Posted 25 Sep 2003 5:39 pm
|
|
Mike i have a old card i got with my profex ll 10 year's ago but i don't know for sure if it's in there,maybe you will know,!!!!!
Charlie Moore........... |
|
|
|
Jerry Roller
From:
Van Buren, Arkansas USA
|
Posted 25 Sep 2003 10:34 pm
|
|
Mike, I am sure I have the Pete Drake setting but my guitar is at a campmeeting in Bentonville. I can get the card tomorrow night and send the setting to you if you don't have it by then.
Jerry |
|
|
|
Mike Brown
From:
Meridian, Mississippi USA
|
Posted 26 Sep 2003 5:43 am
|
|
The Pete Drake preset was part of the early Profex II presets, but I have since wrote over that preset. Charlie, call me toll free at 1-877-732-8391 and I'll walk you through how to find it on the card.
Jerry, if you can e-mail me the parameters or call me and I'll program them into my Profex II while we're on the phone, that would allow me to pass these along to a fellow steeler who doesn't have internet access. He is to call me back in about a week. I knew that you guys could help out.
Thanks Much.
|
|
|
|
Mike Brown
From:
Meridian, Mississippi USA
|
Posted 26 Sep 2003 10:19 am
|
|
| I've received the parameters from a Peavey customer. Thanks for your assistance. |
|
|
|
Ken Fox
From:
Nashville GA USA
|
Posted 26 Sep 2003 2:27 pm
|
|
| Mike, could you post them for the rest of us? I would like to add it to my stored settings. |
|
|
|
Mike Brown
From:
Meridian, Mississippi USA
|
Posted 30 Sep 2003 10:06 am
|
|
Sure, here they are;
3B>RV>SP>DL>CT
3B-Type: guitar, Lo=+50, MFrq=150Hz., Mid++20
Hi=+50-Output level=100
RV-Type: Gated, Tm=25ms, Mix=50%-Output level
100
SP-Mode=Splitter bal, L=100, R=100-output
Level=100
DL-Type=Stereo Ld=240ms, Lf=30%, Rd=240ms, Rf=20%, TS=Off, Mix=+25-output level+100
CT-Fq=10, PH-+50-Output level+100
Hope that this helps. |
|
|
|
