| Author |
Topic: JBL Speaker |
jess dodson
From:
marble falls, texas
|
Posted 16 Feb 2003 3:10 pm |
|
| I have a JBL D 130F 8 ohms..How do I tell if its been reconed...thanks [This message was edited by jess dodson on 16 February 2003 at 03:12 PM.] |
|
|
 |
chas smith R.I.P.
From:
Encino, CA, USA
|
Posted 16 Feb 2003 6:34 pm
|
|
| Does the glue around the cap in the center and around the outer edge of the cone look new? Does the paper look new? Does it have any writing on it that doesn't look like it came from the factory? for starters. |
|
|
|
Donny Hinson
From:
Glen Burnie, Md. U.S.A.
|
Posted 17 Feb 2003 2:51 am
|
|
| Is the gasket one piece, or four pieces? Most recently-reconed speakers have a four-piece gasket. Does the edge of the cone (the suspension-ring) have a black coating on it? |
|
|
|
jess dodson
From:
marble falls, texas
|
Posted 17 Feb 2003 5:25 am
|
|
| Ok this thing is mounted in a 24x24x12 1/2 plywood cabinet I've got it out and still not sure...the glue or the paper doesn't look new....the gasket is one piece and the suspension ring is black coated.... I've had this thing for years I hauled it around in the band trailor w/a Fender Pro head in case someones amp went down.......thanks for the help |
|
|
|
Don Ricketson
From:
Llano, Texas
|
Posted 19 Feb 2003 10:09 am
|
|
Hey Jess, got any pictures? 
------------------
Mullen D10-8/5
Sho-Bud S10-3/4
Evans Amps
"Making The Stars Shine"
|
|
|
|
Tyler Macy
From:
San Diego, CA, USA
|
Posted 20 Feb 2003 12:46 am
|
|
| What codes are on the back of the cone? Also, is the surround doped with a bunch of sticky stuff? |
|
|
|
jess dodson
From:
marble falls, texas
|
Posted 21 Feb 2003 2:10 pm
|
|
| Tyler ....Sorry I've been out of pocket...the ser # on the speaker is 37549 and on the frame it says Fender P/N 023101....on the paper is 58057 ...on the magnet is handwritten 7103N...there is no sticky stuff on it ...thanks |
|
|
|
