| Author |
Topic: HELP!!!!! FOR NASHVILLE 1000 Settings |
Kenny Foy
From:
Lynnville, KY, USA
|
Posted 27 Dec 2002 7:00 pm |
|
| If someone could give me some,out of the box,settings for a Nashville 1000 I would appreciate it.This would give me a place to start. Thanks up front for the replies. |
|
|
 |
Tony Prior
From:
Charlotte NC
|
Posted 28 Dec 2002 7:47 am
|
|
Familiar topic. These setting are also on Peaveys website. Good starting point
pre gain 3 to 6
Bass 3
Mid -9 to -15
shift 800
high 0 to 3
Presence 0 to 3
reverb as desired
Master 5 to whatever ..hold your ears...
good luck
tp[This message was edited by Tony Prior on 28 December 2002 at 07:47 AM.] |
|
|
|
Damir Besic
From:
Nashville,TN.
|
Posted 28 Dec 2002 8:33 am
|
|
| Kenny,even tho I`m a Peavey fan and loved my Nashville 1000,I could never get a good sound out of it without my Digitech 2120.Amp itself didn`t have a sound but in combination with 2120 was great.Planty of power and with 710`s on guitar, close as you can get to "contemporary" sound of the steel guitar. |
|
|
|
Bobbe Seymour
From:
Hendersonville TN USA, R.I.P.
|
Posted 28 Dec 2002 8:44 am
|
|
| Damir, YOUR problem isn't your amp! |
|
|
|
John Steele
From:
Renfrew, Ontario, Canada
|
Posted 28 Dec 2002 11:57 am
|
|
I can't explain why, but I have noticed a significant difference in attack on the NV 1000 depending on where you set your pre and master gains. If they're closer together, (or no farther apart than they absolutely have to be), you get more "snap" out of it.
-John |
|
|
|
Greg Simmons
From:
where the buffalo (used to) roam AND the Mojave
|
|
|
|
Kenny Foy
From:
Lynnville, KY, USA
|
Posted 29 Dec 2002 6:22 pm
|
|
| Gentlemen, THANK YOU for the info and the replies. You too Bobbe! ---Kenny |
|
|
|
b0b
From:
Cloverdale, CA, USA
|
Posted 29 Dec 2002 7:10 pm
|
|
| moved to 'Electronics' |
|
|
|
