| Author |
Topic: Pickups |
Matt Martin
From:
Palm Harbor, Florida, USA
|
Posted 12 Oct 2002 1:37 pm |
|
Has anybody ever mounted a pickup OVER the strings, sort of like the horseshoe??
What would be the out come? And how would you wire it? Inline with the other or seperate? |
|
|
 |
Donny Hinson
From:
Glen Burnie, Md. U.S.A.
|
Posted 12 Oct 2002 6:04 pm
|
|
To what purpose, Matt?  |
|
|
|
Matt Martin
From:
Palm Harbor, Florida, USA
|
Posted 13 Oct 2002 1:39 am
|
|
| Maybe a stereo effect or to switch between a reg and one out of phase. It seems a lot of people here try a lot of experiments and was just wondering. |
|
|
|
Jason Lollar
From:
Seattle area
|
Posted 13 Oct 2002 9:46 am
|
|
I remember someone bought a pickup from me and mounted it over the strings onto something similar to a bigsby vibrato.
They would raise and lower to pickup while playing to get a tremelo effect.
I test pickups over the strings and found if you raise and lower them while the strings are vibrating you can make them sustain as long as you want. |
|
|
|
Donny Hinson
From:
Glen Burnie, Md. U.S.A.
|
Posted 13 Oct 2002 5:32 pm
|
|
|
|
|
|
Jason Lollar
From:
Seattle area
|
Posted 13 Oct 2002 7:32 pm
|
|
| Yes it is strange! |
|
|
|
Tony Harris
From:
England
|
Posted 14 Oct 2002 2:10 am
|
|
| A while ago I came across an 8-string lap steel made by Otwin - I think a German company. It consisted of a body, with tuners,fretboard and bridge - but NO wiring or electronics in it. Above the strings was an assembly holding the pickup, volume control and jack socket. This could be slid up and down on runners to be positioned anywhere from bridge to fretboard. This gave a variety of sounds from just one pickup. Experimenting with this, I'm convinced that the position of the pickup along the string length is VERY important - much more than is given credit for, when talking about pickup types, woods, wiring etc. Guitars and basses have been made with sliding pickups before (Dan Armstrong?)but always under the strings. The disadvantage with this one was that the damn pickup assembly was often where you'd want your picking hand. Always in the way! So I played with it until I found my favourite position, then had the pickup mounted in the body of the guitar conventionally - under the strings, with the jack socket in the body. Eventually sold the guitar on, as I couldn't get on with the very narrow string spacing. |
|
|
|
