| Author |
Topic: Roland Jazz Chorus? |
Matt Steindl
From:
New Orleans, LA, USA
|
Posted 23 Apr 2002 7:43 am |
|
Anyone w/ experience using one of these for PSG? I am looking for an amp I can run my Rhodes Piano and PSG through as well. The reason that I think it might work for PSG is because it is voiced for a pretty wide sonic spectrum, and is supposed to have lotsa clean headroom.
Let me know!
------------------
Mattman in "The Big Sleazy"-:
S-10 Dekley, Suitcase Fender Rhodes, B-bender Les Paul
|
|
|
 |
Earnest Bovine
From:
Los Angeles CA USA
|
Posted 23 Apr 2002 7:48 am
|
|
| For me the Roland Jazz Chorus was a good amp for Rhodes Piano but a bad amp for steel guitar. This was 25 years ago. |
|
|
|
Donny Hinson
From:
Glen Burnie, Md. U.S.A.
|
Posted 23 Apr 2002 8:09 am
|
|
The power (only 60 watts/channel) makes it unsuitable for steel (for me anyway). Also, I think keyboards need more than two 12" speakers for proper dynamics. Don't get me wrong...it's a great amp, and has a chorus sound to die for, it just isn't particularly suited to keyboards or steel.  |
|
|
|
Matt Steindl
From:
New Orleans, LA, USA
|
Posted 23 Apr 2002 10:17 am
|
|
Actually, as far as Rhodes recomended amps. first comes the Fender twin then the jazz Chorus. I guess you are right though 60W is too low for a solidstate amp. HMMMMMMM..... back to the drawing board!
------------------
Mattman in "The Big Sleazy"-:
S-10 Dekley, Suitcase Fender Rhodes, B-bender Les Paul
|
|
|
|
Earnest Bovine
From:
Los Angeles CA USA
|
Posted 23 Apr 2002 10:28 am
|
|
| The JC120 has two 60 watt amps (stereo). |
|
|
|
Bob Hoffnar
From:
Austin, Tx
|
Posted 23 Apr 2002 10:35 am
|
|
I have a JC120 I use as a backup sometimes and it works fine for steel. Peavey Nashville 400s are a bit better if you are looking for a cheap multi use workhorse of an amp.
Bob |
|
|
|
Bob Mainwaring
From:
Qualicum Beach Vancouver Island B.C. Canada
|
Posted 23 Apr 2002 4:45 pm
|
|
Matt, I bought one ordered new from a dealer a couple of years back, it sounded fantastic in the store, I tried it out playing for about three weekends and decided it wasn't for me.
The reverb I found was one of the best for an inbuilt unit, for regular guitar - it's one of the best amps around.
Bob Mainwaring. Z.Bs. and other weird things.
------------------
|
|
|
|
Tom Jordan
From:
Wichita, KS
|
Posted 23 Apr 2002 6:22 pm
|
|
Matt,
I did play my Sho-bud and BMI through my JC-120 for 4 or 5 years. It had the power needed for a 4 piece honky tonk band and my Tele' sounded great through it....but I was never happy with the the steel sound. It just couldn't deliver the punch needed to separate the lower strings.
Ya know what though? I got payed every night so I guess that means it "works"!
Tom Jordan
------------------
Sierra Royalty S12 5/5 Universal Tuning, Session 400 LTD, ProFex II
|
|
|
|
Joerg Hennig
From:
Bavaria, Germany
|
Posted 25 Apr 2002 11:59 am
|
|
| I played steel through a Jazz chorus once and it was a nightmare. Too bright and harsh, even at moderate volumes. Unfortunately, the guy I did the session with had only that one and a Fender Princeton. Should have brought one of mine, but at that time I didn´t have a car that was big enough... |
|
|
|
Wayne Brown
From:
Bassano, Alberta, Canada
|
Posted 26 Apr 2002 3:20 pm
|
|
try a nashville 1000  |
|
|
|
Bob Hoffnar
From:
Austin, Tx
|
Posted 26 Apr 2002 5:41 pm
|
|
Joe,
Which amp did you end up using on your session ? Did you try out the Princeton ?
Also I don't understand your response about the JC120. That amp has fully functional tone controls and a couple different input jacks that should clear up the brite thing with no problem. Its a pretty boring sounding solid state amp but it is very well made and is capable of great tonal variation.
Bob
|
|
|
|
