Author |
Topic: Profexii Rom Card |
Carl Johnson
From: Cortez, CO, USA
|
Posted 4 Aug 2001 10:53 pm
|
|
WHATS THE DIFFERANCE BETWEEN A RAM CARD AND A ROM CARD? AND HOW DO YOU USE THE ROM CARD? |
|
|
|
Bill Crook
From: Goodlettsville, TN , Spending my kid's inheritance
|
Posted 5 Aug 2001 2:58 am
|
|
As far as the "Profex II is concerned,no DIFFERANCE at all. It's just a memory card specifically the"Profex II" EFX unit.
Unfortunately, This card is no longer made. You may find find one avalable from another steel player somewhere but "Peavey" does not make this card anymore. I have found out that "Roland" makes a ROM-card that will work in this unit,but I cannot vouch that it will work in all cases.
All in all, I still feel that the "Profex II" is one of the best EFX units ever made for steel players.
|
|
|
|
Don Sulesky
From: Citrus County, FL, Orig. from MA & NH
|
Posted 5 Aug 2001 3:14 am
|
|
I diddo that.!!!!!!!!!!!!!!!!
Don |
|
|
|
Jack Stoner
From: Kansas City, MO
|
Posted 5 Aug 2001 4:08 am
|
|
A "ROM" is a "Read only Memory" where a "RAM" is a Random Access Memory that can be written to and read, just like the memory in a computer.
If you had a "ROM" card you could only read from it, you could not write to it. The Peavey "Cache" card is a RAM card that you can store (write) user programs to and load (read) user programs from it. The same Peavey card is used in the Profex II, Transtube Fex, Tube Fex and several other Peavey devices. |
|
|
|
Don Benoit
From: Okanagan Falls, BC
|
Posted 5 Aug 2001 8:36 am
|
|
I like the ProFex II but I wish the delay could be set higher than 350MS. It would be nice if the delay would go to at least 450MS. I have to put a external digital delay pedal to get it. |
|
|
|
Don Sulesky
From: Citrus County, FL, Orig. from MA & NH
|
Posted 5 Aug 2001 10:02 am
|
|
Don if you set the delay type to tapped instead of stereo you can go as high as 724MS.Hope this helps.
Don |
|
|
|
Carl Johnson
From: Cortez, CO, USA
|
Posted 5 Aug 2001 11:54 am
|
|
O.K. SO HOW COME WHEN I TRY TO LOAD THE ROM CARD IT SAYS "NO CARTRIDGE PRESENT"?(AND YES I DID PUT THE CARD IN THE SLOT) DOES THE ROM CARD HAVE A BATTERY IN IT? |
|
|
|
Jack Stoner
From: Kansas City, MO
|
Posted 5 Aug 2001 12:22 pm
|
|
You have to initialize the cache card before you can write to it.
Also please turn off the capitals. It's considered shouting on the forum. Thanks |
|
|
|
Carl Johnson
From: Cortez, CO, USA
|
Posted 5 Aug 2001 12:26 pm
|
|
sorry |
|
|
|