Fender Volume Tone Pedal Fixer

Phil Wagner · From: Portland Oregon United States

Hello,
I just bought an older fender vol-tone pedal and it's a fixer.It has a lot of rust on the inside and one of the springs busted from rust.
If anyone has any advice on restoring the pedal,I would greatly appreciate hearing it.Also,where can I get a replacement spring and possibly some new string to replace the old stuff?
Thanks a bunch for any help.
Phil Wagner

Ken Fox · From: Nashville GA USA

You might try Parkrose hardware or Wink's hardware (both in Portland). Both will have a good selection of springs. Check with Sierra Pedal Steel Company for the string. I used a good nylon string from the hardware store for mine!

Bob Knight · From: Bowling Green KY

This should help Phil.
http://www.scottysmusic.com/info/fenderinfo.htm

------------------

Bob

'71 Emmons D10, 8&4
Peavey DPC 1400
Peavey TransTube Fex
Peavey Classic 112es BW
Peavey Classic 115es BW

Phil Wagner · From: Portland Oregon United States

Thanks Bob and Ken.Your responses helped a bunch.
Phil

Forum Index > Electronics		Next oldest topic :: Next newest topic

All times are GMT - 8 Hours	Jump to: