| Author |
Topic: tube fex |
George Erickson
From:
Ipswich, MA USA
|
Posted 13 Oct 2000 5:38 pm |
|
Can someone give me the key strokes to set the output levels on the tube fex. ie CM=100 etc. I have done it before, but l lost the proceedure. I'm going nuts trying to solve it and l am sure that it is something simple that l forgot. Old age is wonderful!!!
Thanks |
|
|
 |
mtulbert
From:
Plano, Texas 75023
|
Posted 14 Oct 2000 4:00 am
|
|
George,
Without the Tube on just keep hitting the global button to set output, and tone settings.
Regards,
Mark T. |
|
|
|
George Erickson
From:
Ipswich, MA USA
|
Posted 14 Oct 2000 5:39 am
|
|
Thanks Mark
I'll try that this afternoon. |
|
|
|
George Erickson
From:
Ipswich, MA USA
|
Posted 15 Oct 2000 1:21 pm
|
|
Hi Guys
Eureka!! 
The output level of any of the effects can be programmed by placing the cursor under the arror or + sign located between effects. Then press edit and the effect preceeding the arrow or + can be changed by using the up/down arrows.
You will not find these info in the manual & l don't know why.
Anyway that problem is resolved.
|
|
|
|
Mike Brown
From:
Meridian, Mississippi USA
|
Posted 16 Oct 2000 10:36 am
|
|
I'll make note of this oversight and inform our technical writer. thanks.
Mike Brown
Peavey Electronics Corporation |
|
|
|
