| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic Power Strip/Conditioner
Reply to topic
Author Topic:  Power Strip/Conditioner
Kevin Mincke


From:
Farmington, MN (Twin Cities-South Metro) USA
Post  Posted 2 Sep 2000 1:12 pm    
Reply with quote

Any suggestions for a quality power "condtioner" strip similar to one used on a pak-a-seat vs. buying another rack mount type unit?
View user's profile Send private message Send e-mail Visit poster's website
Jack Stoner


From:
Kansas City, MO
Post  Posted 3 Sep 2000 2:55 am    
Reply with quote

Depends on the quality you want. The ones at Wal-Mart are not very good as far as surge protection. If you want a high grade surge protector it's probably in the $100 range, but you should be able to come up with one in the $30 range that would be adequate for musical equipment.
View user's profile Send private message Send e-mail
Chuck Martin


From:
Clifton, Virginia
Post  Posted 3 Sep 2000 7:10 pm    
Reply with quote

Seems to me that a high quality unit made for computer equipment might be the way to go if you want clean power. Should be able to get something pretty decent for around $50 bucks if you shop the sales at CompUSA.
View user's profile Send private message Send e-mail
Rich Paton

 

From:
Santa Maria, CA.,
Post  Posted 4 Sep 2000 7:05 pm    
Reply with quote

Kevin, there is a great deal of variation in both the quality of, and the features incorporated in the zillions of power strips on the market.
Any unit you buy should include:
1). A U.L. 1449 listing
2). Multimode configuration

There are LOTS of bogus "surge supressor" units for sale. In fine print, the statement
"Not listed or evaluated for effectiveness in controlling electrival transient voltages" or something to that effect is found on their packaging and/or on the unit. Not evaluated? So what's the point, then?
Multimode configuration refers to a unit which has TVSS (Transient Voltage Surge Supression) devices incorporated in it beyond simply one TVSS device connected from the line (hot) wire to ground. Full, effective protection requires additional TVSS devices connected from line to neutral, and from neutral to ground.
I've received a good bit of training on the area of TVSS, and over the past 10 years have specified, recommended, and installed high quality TVSS equipment for a lot of satisfied and protected customers.
If I were to buy a TVSS power strip to use with my own musical electronics, the link here goes to the one I would choose.
I have no financial connection whatsover with the manufacturer. I just know that it's a very well made and effective unit. This particular unit also includes EMI/RFI line filtering, which cant't be bad for your intended use of the strip.
http://www.leviton.com/sections/prodinfo/surge/sheets/s5c17p5.htm#up
View user's profile Send private message
Kevin Mincke


From:
Farmington, MN (Twin Cities-South Metro) USA
Post  Posted 5 Sep 2000 12:47 am    
Reply with quote

Rich, thanks for the link. That's exactly what I was looking for! I'll look for a place to order one. Kevin
View user's profile Send private message Send e-mail Visit poster's website
Lynn Kasdorf


From:
Waterford Virginia, USA
Post  Posted 5 Sep 2000 9:26 am    
Reply with quote

Cheap surge protectors use MOV devices as surge supressors. I have read that MOVs do work, but that they wear out, the more hv transients they are exposed to. So, the surge supressor gets less and less effective over time.

There must be a better technology out there that does not exhibit this problem, but I don't know what it is. I'd like to, because then I would install them inside all of my amps!

------------------
"You call that thing a guitar?"
View user's profile Send private message Send e-mail Visit poster's website
Rich Paton

 

From:
Santa Maria, CA.,
Post  Posted 7 Sep 2000 12:13 am    
Reply with quote

Kevin, that strip probably won't be cheap in price, but then neither is the gear you want to protect, right?
E-mail me at dr_electron@hotmail.com if you have trouble finding one. I can probably get a good wholesale price on it. At least I can try to!
View user's profile Send private message
Donny Hinson

 

From:
Glen Burnie, Md. U.S.A.
Post  Posted 7 Sep 2000 7:50 am    
Reply with quote

I think that most of the gear that we use has adequate protection via the power supply. The transformers and capacitors in most amps, and reputable accessory gear, handle most transient spikes that come over the AC line. The only thing they will not protect against is a zap from lightning (which will also fry anything it hits, including a power strip with some little semiconductor device). In all my years of playing, I have never heard of an amp damaged by anything other than lightning (via the AC line).

I have very little faith in the $75.00 supressor on my computer. But wifey said "you should get one". Sometimes spending is easier than arguing!
View user's profile Send private message Send e-mail

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron