| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic Check these custom lap steels out!!!
Reply to topic
Author Topic:  Check these custom lap steels out!!!
Olli Haavisto


From:
Jarvenpaa,Finland
Post  Posted 3 Feb 2004 4:48 am    
Reply with quote

Check these two guitars out!! I designed them with the young luthier Ville Tyyster and he did a knock-out job with building them,don`t you think. Both of them have since been fitted with Lollar Chicago Steel pick ups,which, like some of you know are fantastic.The gtrs are constructed like a cross between a Les Paul and a 335,semi-hollow mahogany body with a maple or flamed birch (the red one) top. The red one has a 25" scale,tuned to standard G dobro tuning,the natural is a 27" same tuning tuned down to C.Both guitars have piezo under saddle P/us with separate outputs.
There are also other goodies on Ville`s web site.
http://www.tyyster.com/baritonilapsteel_1.html
http://www.tyyster.com/lapsteel_red_3.html
------------------
Olli Haavisto
Polar steeler
Finland


[This message was edited by Olli Haavisto on 03 February 2004 at 04:52 AM.]

[This message was edited by Olli Haavisto on 03 February 2004 at 04:53 AM.]

[This message was edited by Olli Haavisto on 03 February 2004 at 04:55 AM.]

View user's profile Send private message Send e-mail
James Quackenbush

 

From:
Pomona, New York, USA
Post  Posted 3 Feb 2004 6:31 am    
Reply with quote

Olli,
This looks like some really nice work !
I hope he does well with his company ..Jim
View user's profile Send private message Send e-mail
Bill Leff


From:
Santa Cruz, CA, USA
Post  Posted 3 Feb 2004 6:40 am    
Reply with quote

Nice looking guitars. They look very similar to the Bill Asher's guitars that were originally designed for and with guitarist Ben Harper, now known as the "Electro Hawaiian"

http://www.guitartraditions.com/
View user's profile Send private message Send e-mail
Olli Haavisto


From:
Jarvenpaa,Finland
Post  Posted 3 Feb 2004 7:18 am    
Reply with quote

Bill,
I have an Asher and I have to admit that it did influence the design...
There are differences: the bodies are smaller and they are not carved from a solid block,they have a bent frame with separate top and back and a center block like a 335. Also the tone we went for is in the Cooder/Lindley area and I think we succeeded very well.I like to think of them as lap slide guitars as opposed to descendants of the hawaiian guitar.

[This message was edited by Olli Haavisto on 03 February 2004 at 09:16 AM.]

View user's profile Send private message Send e-mail
Brad Bechtel


From:
San Francisco, CA
Post  Posted 3 Feb 2004 9:13 am    
Reply with quote

Beautiful job, Olli! Congratulations.

------------------
Brad's Page of Steel
A web site devoted to acoustic & electric lap steel guitars

View user's profile Send private message Send e-mail Visit poster's website
Bill Leff


From:
Santa Cruz, CA, USA
Post  Posted 3 Feb 2004 9:23 am    
Reply with quote

Steinar, looks like a good reason for a visit to Finland!

Olli, check your email!

Bill
View user's profile Send private message Send e-mail
Steinar Gregertsen


From:
Arendal, Norway, R.I.P.
Post  Posted 3 Feb 2004 10:12 am    
Reply with quote

A barytone? Hmmmmm..... Very nice lap steels Olli. And that Firebird was very nice too......

A bit hard to navigate the site since my Finnish isn't the best,- how are these priced?

Steinar

------------------
www.gregertsen.com


View user's profile Send private message Send e-mail Visit poster's website
Jon Light


From:
Saugerties, NY
Post  Posted 3 Feb 2004 12:31 pm    
Reply with quote

Very very nice.
View user's profile Send private message Send e-mail Visit poster's website
CrowBear Schmitt


From:
Ariege, - PairO'knees, - France
Post  Posted 3 Feb 2004 1:54 pm    
Reply with quote

indeed
View user's profile Send private message Send e-mail Visit poster's website
Travis Bernhardt

 

From:
Vancouver, British Columbia, Canada
Post  Posted 3 Feb 2004 2:08 pm    
Reply with quote

Beautiful guitars, and well done photographs, too.

-Travis
View user's profile Send private message Send e-mail
HowardR


From:
N.Y.C.-Fire Island-Asheville
Post  Posted 3 Feb 2004 4:18 pm    
Reply with quote

Beautiful work. Isn't a 27" scale a bit on the long side?
View user's profile Send private message Send e-mail
Andy Volk


From:
Boston, MA
Post  Posted 3 Feb 2004 4:44 pm    
Reply with quote

Depends, Howard. Ry Cooder has a slide instrument that's as long as his basement. He plays it with a wine bottle.
View user's profile Send private message Send e-mail Visit poster's website
Terry Farmer


From:
Albuquerque, New Mexico, USA
Post  Posted 3 Feb 2004 5:51 pm    
Reply with quote

Beautiful craftsmanship and design!
View user's profile Send private message Send e-mail
Chuck Fisher

 

From:
Santa Cruz, California, USA * R.I.P.
Post  Posted 3 Feb 2004 6:03 pm    
Reply with quote

Gosh those are pretty !

Clean work, nice lines - I like!
View user's profile Send private message Send e-mail
Jussi Huhtakangas

 

From:
Helsinki, Finland
Post  Posted 3 Feb 2004 10:18 pm    
Reply with quote

I saw one of these just last week in Juha Lottonen's ( another phenomenal Finnish luthier ) showroom. Very fine work indeed!!
View user's profile Send private message Visit poster's website
Olli Haavisto


From:
Jarvenpaa,Finland
Post  Posted 4 Feb 2004 12:22 pm    
Reply with quote

A few of you have e-mailed me about the guitars;pricing etc. Anyone interested can e-mail Ville Tyyster, the guy who built them directly at ville.tyyster@tyyster.com Thanks for your interest and nice comments!!!

Olli

[This message was edited by Olli Haavisto on 04 February 2004 at 12:24 PM.]

View user's profile Send private message Send e-mail

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron