| Author |
Topic: Fender Leg Sockets |
Rick Collins
From:
Claremont , CA USA
|
Posted 27 Aug 2003 7:54 am |
|
The early 50's leg sockets for steel guitars were manufactured by welding the (inside) threaded cylinder, at an angle, to the round flat plate.
The later ones look to be steel castings; but I'm unsure of this. Does anyone know if the later ones were cast; or were they machined and then heated and bent to the desired angle?
Many Thanks, Rick |
|
|
 |
Erv Niehaus
From:
Litchfield, MN, USA
|
Posted 27 Aug 2003 11:45 am
|
|
It looks like the ones Bobbe Seymour sells are cast.
Erv |
|
|
|
Jody Carver
From:
KNIGHT OF FENDER TWEED
|
Posted 27 Aug 2003 5:28 pm
|
|
I have three original leg flanges.
They came off my 52 Custom. |
|
|
|
Bobbe Seymour
From:
Hendersonville TN USA, R.I.P.
|
Posted 27 Aug 2003 6:03 pm
|
|
Rick, if Jody can't help, we have many here that we have replaced with our new ones. Several sets as a matter of fact. The double and triples had a different angle than the doubles or four neckers did so tell me what number of degrees you want and we'll try to serve you,
Bobbe |
|
|
|
Jody Carver
From:
KNIGHT OF FENDER TWEED
|
Posted 27 Aug 2003 7:20 pm
|
|
Thats right Rick,Bobbe has what you need.
Mine are not for sale,,you know why??
I wouldnt have a leg to stand on  |
|
|
|
George Keoki Lake
From:
Edmonton, AB., Canada
|
Posted 31 Aug 2003 4:15 am
|
|
| I'd like to add a FOOTnote to Jody's comment, but I am at a loss for words. |
|
|
|
Joey Ace
From:
Hamilton, Ontario, Canada
|
Posted 31 Aug 2003 4:58 am
|
|
| Socket to me, socket to me, ... |
|
|
|
Jody Carver
From:
KNIGHT OF FENDER TWEED
|
Posted 1 Sep 2003 10:06 am
|
|
Joey
I think someone else did and not me 
Your Nobody Till Somebody Loves You,,in that
case,you are a "Somebody to many,especially me, and Sally of course.
Damm,I wanted to have you play along with me
and work out some HCOA stuff,,BUT  and
I'll be in touch. |
|
|
|
