How to attach leg clips

Jason Altshuler · From: Brooklyn, NY

I have seen on here that people often use clips to attach stomp boxes to the legs of their steel. As someone who has not messed around with making pedals and is not familiar with their construction, what would be the best way to attach the clips to the actual box? Also, are there are any options for clips that people particularly recommend?

Jerry Overstreet · From: Louisville Ky

You can make your own from conduit, but I like these:
https://steelguitarshopper.com/show-pro-leg-clamps-for-pedal-steel-guitars-2-25-or-3-50/

You can buy them from the forum store by clicking on the accesories header above then looking for Show Pro or you can probably buy them direct from SP.

It depends on the box you have and how the components inside are arranged how you attach them.

My own personal preference is to drill the holes in the back of the stomp box cover, assuming it's removable, and rivet or screw the clip to that from outside the clip. This way, the screws, rivets don't interfere with clipping the unit on the leg.

Just be sure you have clearance for the electronics so you don't touch or short anything inside.

Bobby D. Jones · From: West Virginia, USA

Just a little warning, If your guitar has aluminum legs that are chrome plated. Do not use metal clamps on the leg. Use plastic clamps or plastic conduit clamps.
I bought a steel with aluminum legs, That someone had used a steel clamp with a rough place on it. Here is the result, Many Boo Boo's

Richard Alderson · From: Illinois, USA

3M makes a rubber broom holder that won't damage the legs. It comes with adhesive that you can attach to the back of the stomp box. You can do either a temporary attachment with physical restraint such as clips/screws, or use the adhesive it comes with.
_________________
Derby SD-10 5x6; GFI S-10 5x5; GFI S-10 5x5; Zum D-10 8x7; Zum D-10 9x9; Fender 400; Fender Rumble 200; Nashville 400; Telonics TCA-500.

Dave Grafe · From: Hudson River Valley NY

Often there are already screws in the pedal that can be used to attach the clip without drilling. I put heatshrink over the clips to prevent marking the legs, no doubt a tape or fabric wrap would do the same. Here's what I use...

https://www.acehardware.com/departments/hardware/window-and-screen-hardware/window-and-screen-clips/5203435

John Sims · From: Ft. Lauderdale, FL

I have used a PVC Saddle with excellent results

_________________
Best Regards,

John

1997 Carter U-12 Double Body-Natural Birdseye Maple-8p/5k, Peavey Nashville 1000 Amp, Goodrich L10K Vol. Pedal, Boss DD-3 Delay, Boss CE-5 Chorus, Behringer UMC-204HD Audio Interface, AKAI MPK Mini MK3 Professional Midi Keyboard/Controller, Gretsch Bobtail Resonator, Fender Banjo, Rondo SX Lap Steel (C6), DIY Lap Steel (Open D), and a few Mojo Hand Cigar Box Guitars (MojoHandGuitars.com).

Ron Pruter · From: Arizona, USA

John, That's really UGLY!
_________________
Emmons SKH Le Grande, '73 Fender P/J bass, Tick tack bass, Regal high strung, USA Nashville 112.

Jon Jaffe · From: Austin, Texas

I get them from Brad Sarno and use the existing pedal screws to attach the clips. When the screws cannot be countersunk, I cover them with the fuzzy side of velcro.

https://www.sarnomusicsolutions.com

John Sims · From: Ft. Lauderdale, FL

Bruce Derr · From: Lee, New Hampshire, USA

I've been thinking of trying one of these sturdy snow-blower clean-out tool clamps. The tool is 7/8" diameter so the clamp ought to work on a steel leg. It might be a little too long for some effects, and it's on the pricey side, I suppose.

I tried the Command broom gripper last year. It worked well, but it's a little bulky, and can sag a bit when holding something heavy. Still, it strikes me as a very cool design. I've also used those metal broom clips like what Dave uses (different make, same design). I used them to mount an effects box I built back around 1980. I used it for many years and the clamps did not scratch the leg of the steel. If the leg had been aluminum it might have been different.

I also like Brad's new clamp. I got one to replace the broken one on my Freeloader. It grips very securely.

Forum Index > Pedal Steel		Next oldest topic :: Next newest topic

All times are GMT - 8 Hours	Jump to: