| Author |
Topic: Pedal rods needed - one S-10 with hex sleeve; 2 800 rods |
Matthew Lutton
From:
Indiana, USA
|
Posted 14 Nov 2024 5:45 am |
|
I’ve checked PSG, don’t see the parts or sizes needed there. I need:
A) 1 S-10 pedal steel pedal rod with hex sleeve (S10 student from 70s). Hook end and barrel sleeve with hex connection to pedal. Same as used in Sho-Bud S 10 models.
B) 2 pedal rods for the large chrome pedals for a double 8 1000 model (I believe). It has the big pedal connector rods (32-33” in length with bent end to connect to pulleys and the other end has a screw on sleeve / barrel (not sure the size) end to connect to pedals. It’s definitely a model 1000 so if anyone has a lead on two pedal rods, I could piece together this pedal steel. As is, you can set it up for six strings and pedals or 8 strings with only 6 pedals but I’ve not seen the point until I can connect all pedals.
Reach out via email or pm if YOU can help, especially with originals pedal rods. Legs I’ve found but pedal rods I cannot find in the proper type/size. Pgparts doesn’t have what I need.
Is there anyway to create them or make them? I’m not that handy but with some direction I could see bending the end to connect to the pulley, the hard part would be sourcing the right size and type of steel and I don’t know how I’d accomplish the screw off
Thanks for all the help and support,
Matt in Indy
_________________
Thanks!
Matt Lutton
Mrlutton@gmail.com
https://reverb.com/shop/matthews-boutique-2468
Last edited by Matthew Lutton on 8 Dec 2024 5:08 am; edited 1 time in total |
|
|
 |
Matthew Lutton
From:
Indiana, USA
|
Posted 14 Nov 2024 10:48 am Harlin Bros guitars wanted
|
|
Also, I’m in fishers where the Harlin bros got started. I’d like a uni-lord with no pedals and maybe a guitar they made. Anyone with harlin bros gear, old brochures or catalogs, I’m interested! And parts…
_________________
Thanks!
Matt Lutton
Mrlutton@gmail.com
https://reverb.com/shop/matthews-boutique-2468 |
|
|
|
Matthew Lutton
From:
Indiana, USA
|
|
|
|
