| Author |
Topic: Zum Tuning Nuts |
Shannon Farmer
From:
Oklahoma, USA
|
Posted 25 Sep 2024 12:27 pm |
|
I've got an '84 ZUM D10 that I'm in the process of doing a mini refurb on. Can someone tell me what size nylon tuning nuts I need? I'm not worried about the length, just the female end that connects to the rod. Hoping there was a standard size for Zums. I see several sizes at PSGparts.com
_________________
God Bless! |
|
|
 |
Barry Coker
From:
Bagley Alabama, USA
|
Posted 27 Sep 2024 3:21 am
|
|
May get some correction on this:
1/8" rod user a 6/40 threads My 1980 Zum has those
7/64" rod used a 5/40 thread
3/32" rod used a 4/40 thread
Barry
_________________
Zum-D-10, Webb 614-E, 65 Pro Reverb, Evans RE200, 69 Gibson Birdland, 89 Telecaster EAD Bad!! |
|
|
|
Bobby D. Jones
From:
West Virginia, USA
|
Posted 1 Oct 2024 12:11 pm
|
|
Barry Coker is right.
1/8" - 6-40 Zum and My old MSA Classics
Some people thread 1/8" 5-40 leaves a lump where the threads meet the smooth rod. Shade tree mechanics, You may find some 6-32 thread for added on rods.
7/64 - 5-40 Emmons
3/32 - 4-40 GFI and many other guitar.
The good thing about having 1/8" rods 6-40 rods, Get a #33 drill bit. Any size hole tuning nut can be drilled out and fit your Zum.
Drilling out smaller hole tuning nuts, Was a trick I learned when I gigged an MSA Classic and could not find proper tuning nuts in a, Gota have it now situation. |
|
|
|
Barry Coker
From:
Bagley Alabama, USA
|
Posted 1 Oct 2024 1:42 pm
|
|
I think some of the ShoBuds and Sho Pros Use 7/64, 5/40 thread too.
_________________
Zum-D-10, Webb 614-E, 65 Pro Reverb, Evans RE200, 69 Gibson Birdland, 89 Telecaster EAD Bad!! |
|
|
|
