| Visit Our Catalog at SteelGuitarShopper.com |

Post new topic String spacing
Reply to topic
Author Topic:  String spacing
John Hyland

 

From:
South Australia
Post  Posted 18 May 2024 2:01 pm    
Reply with quote

My 1975 shobud has string spacing at the bridge of 3/8” (.375” or 9.5mm). I would be interested to know why players prefer narrower spring spacing. Or is it more about not making 12 or 14 stringer too wide.
Also if any one can nominate their PSG and spring spacing that would be informative . ( measure all 10 string and divide by 9)

Thanks. John
View user's profile Send private message Send e-mail
Ian Rae


From:
Redditch, England
Post  Posted 18 May 2024 3:45 pm    
Reply with quote

I'm surprised that a pedal guitar is that wide. The traditional spacing is 11/32" (approx. 8.7mm)
_________________
Make sleeping dogs tell the truth!
Homebuilt keyless U12 7x5, Excel keyless U12 8x8, Williams keyless U12 7x8, Telonics rack and 15" cabs
View user's profile Send private message Send e-mail Visit poster's website
Ken Metcalf


From:
San Antonio Texas USA
Post  Posted 21 May 2024 7:01 am    
Reply with quote

Playing a Push Pull and a Carter was a problem for me going back and forth. I once bought an old Excel and the strings were very close together.
ShoBud strings are spaced further apart. It's whatever you are used to.
A 2nd guitar is a luxury and is what led me finally to get 2 MSAs.
_________________
MSA 12 String E9th/B6th Universal.
Little Walter PF-89.
Bunch of stomp boxes
View user's profile Send private message Send e-mail
Ian Rae


From:
Redditch, England
Post  Posted 21 May 2024 9:28 am    
Reply with quote

I just measured my Williams 12-string at 8.1mm, which is a shade over 5/16". I remember finding it a little tight to begin with, but I'm used to it now.
_________________
Make sleeping dogs tell the truth!
Homebuilt keyless U12 7x5, Excel keyless U12 8x8, Williams keyless U12 7x8, Telonics rack and 15" cabs
View user's profile Send private message Send e-mail Visit poster's website
Larry Allen


From:
Kapaa, Kauai,Hawaii
Post  Posted 21 May 2024 12:02 pm     Spacing
Reply with quote

My Excel S-10s are 1/4” at the nut and 11/32” at the bridge. Very Happy
_________________
Excel steels & Peavey amps,Old Chevys & Motorcycles & Women on the Trashy Side
View user's profile Send private message Send e-mail
John Hyland

 

From:
South Australia
Post  Posted 21 May 2024 1:28 pm    
Reply with quote

Thats all good info. The other part of my question is why have pedal steel has made the spacing much tighter than typical lap steels. I would have thought what is good for a lap steel would be good for PSG. I wonder if this is some attempt to reduce cabinet drop with a short bridge axle.
View user's profile Send private message Send e-mail
Bobby D. Jones

 

From:
West Virginia, USA
Post  Posted 21 May 2024 2:34 pm    
Reply with quote

Its not just that the strings are wider on some steels. Clearance down through the changer, When a string has 2 or 3 raises and lowers on it, Getting all the bell cranks and rods clearance under the guitar, All have to be considered when designing a guitar. So the widest needed space for 1 loaded raise and lower string is figured out, Determines the width of all strings, For even spacing.

An all pull changer guitar also has to have the raise finger mounted on the changer axle, Which adds to string width also.
If the guitar has some type of Comb design in the changer for more support on the Changer shaft, Also have to be considered also.
View user's profile Send private message Send e-mail

All times are GMT - 8 Hours
Jump to:  
Please review our Forum Rules and Policies
Our Online Catalog
Strings, CDs, instruction, and steel guitar accessories
www.SteelGuitarShopper.com

The Steel Guitar Forum
148 S. Cloverdale Blvd.
Cloverdale, CA 95425 USA

Click Here to Send a Donation

Email SteelGuitarForum@gmail.com for technical support.


BIAB Styles
Ray Price Shuffles for Band-in-a-Box
by Jim Baron