| Author |
Topic: Franklin Knee Lever Extender |
Bob Snelgrove
From:
san jose, ca
|
|
|
 |
Greg Derksen
From:
Alberta, Canada
|
Posted 20 Mar 2024 5:09 am |
|
I would be interested as well in some nice looking adjustable
Knee lever flags for my Franklin
Johnny King had some real nice ones as I recall
Greg |
|
|
|
Bob Snelgrove
From:
san jose, ca
|
Posted 20 Mar 2024 7:50 am
|
|
| Greg Derksen wrote: |
I would be interested as well in some nice looking adjustable
Knee lever flags for my Franklin
Johnny King had some real nice ones as I recall
Greg |
Johnie says NO
 |
|
|
|
Wayne Brown
From:
Bassano, Alberta, Canada
|
Posted 20 Mar 2024 12:02 pm steel guitar parts
|
|
Anybody have some pictures
thanks
wayne
_________________
Owner Out West Music,Seats,Parts and accessories
www.outwestcountry.ca |
|
|
|
Bob Snelgrove
From:
san jose, ca
|
|
|
|
Steve Spitz
From:
New Orleans, LA, USA
|
Posted 20 Mar 2024 4:38 pm Flags
|
|
GFI made me one. After I bought a guitar from them, Gene Fields walked up to me at the Dallas show, and gave it to me. I didn’t ask for it, but it was great.
It didn’t require any drilling or tapping , it had a channel for the lever, and had set screws that held it in place.
That’s as best as I remember it, it’s been a while. |
|
|
|
Wayne Brown
From:
Bassano, Alberta, Canada
|
Posted 20 Mar 2024 4:51 pm steel guitar parts
|
|
Those flags are pretty easy to make I would just need to know what size you would need. Also unless the lever is sent to me or you come to my shop. You would have to be responsible for drilling and tapping. Barry Coker should be able to make them for you as well.
thanks
wayne
_________________
Owner Out West Music,Seats,Parts and accessories
www.outwestcountry.ca |
|
|
|
Greg Derksen
From:
Alberta, Canada
|
Posted 21 Mar 2024 4:21 am
|
|
If you type in the search
“Sweet spot knee lever flags you can build”
You can see them
Clever , because no drilling was required,
They looked nice as well,
Thx
Greg |
|
|
|
Barry Coker
From:
Bagley Alabama, USA
|
Posted 21 Mar 2024 4:26 am
|
|
Hey Bob send me an email I need a couple of measurments and I can make you some up.
Barry
_________________
Zum-D-10, Webb 614-E, 65 Pro Reverb, Evans RE200, 69 Gibson Birdland, 89 Telecaster EAD Bad!! |
|
|
|
Bill Holbrook
From:
New Hampshire, USA
|
Posted 21 Mar 2024 8:09 am Knee lever covers
|
|
| I have a Franklin guitar and needed something to pad my knees. I went to the hardware store and bought clear tubing, slide them on and get instant relief. Then the levers fold up as they did. |
|
|
|
Bob Snelgrove
From:
san jose, ca
|
Posted 21 Mar 2024 3:46 pm
|
|
| Barry Coker wrote: |
Hey Bob send me an email I need a couple of measurments and I can make you some up.
Barry |
Barry,
I'll have to find someone who has one first and we will go from there.
thx
bob |
|
|
|
Barry Coker
From:
Bagley Alabama, USA
|
Posted 22 Mar 2024 4:48 am
|
|
I just need the width and thickness of your knee lever and which one your knee contacts a picture of the knee hanging down and the two measurments would be good.
Barry
_________________
Zum-D-10, Webb 614-E, 65 Pro Reverb, Evans RE200, 69 Gibson Birdland, 89 Telecaster EAD Bad!! |
|
|
|
Johnie King
From:
Tennessee, USA
|
Posted 23 Mar 2024 5:45 am
|
|
One of these you need a milling machine the other one with a screw a person could make with 1/8 inch aluminum.
 |
|
|
|
