| Author |
Topic: B6 redo |
Rick Aiello
From:
Berryville, VA USA
|
Posted 7 Mar 2024 4:18 pm |
|
I bought a "gutted" Bakelite maybe 25 years ago. I've collected some parts (plates & tuning machines) over the years ... dropped in a few different horseshoe pickups that we made back in the old days ... but essentially, it has been sitting in the corner for years ...
It has metal fret markers and a "cutaway" neck ... first run of the B6s ... so I figured it would be a prime candidate to test a new pickup I developed ... so I made some knobs ... bought some pots and a cap ... and strung it up ...
Here's what it sounds like ...
https://on.soundcloud.com/ots5Q8dSDv2mituG7
"Indian Love Call" recorded on my iPhone at 5 am this morning ... I'm less shakey in the early morning ... so I get up real early to wind, solder and play before the kids get up  |
|
|
 |
Samuel Phillippe
From:
Douglas Michigan, USA
|
Posted 7 Mar 2024 4:31 pm
|
|
Nice sound and some good playing.
Sam |
|
|
|
Miles Lang
From:
Venturaloha
|
Posted 7 Mar 2024 7:07 pm
|
|
That’s awesome
_________________
Santo Fan Club - from the island of Coney to the sands of Rockaway
Jill Martini & The Shrunken Heads
All aloha, all the time |
|
|
|
Rick Aiello
From:
Berryville, VA USA
|
Posted 8 Mar 2024 1:45 am
|
|
Thank you gentlemen  |
|
|
|
Bill Sinclair
From:
Waynesboro, PA, USA
|
Posted 8 Mar 2024 7:30 am
|
|
Nice guitar, nice pickup, nice playing!
Are you planning to do anything about the crack going across the bottom of the guitar? The reason I ask is because I have a pre-war B6 with a similar crack but not as severe. I was wondering if it would be worthwhile to force some JB Weld into the crack to stabilize it or just let it be. |
|
|
|
Rick Aiello
From:
Berryville, VA USA
|
Posted 8 Mar 2024 8:59 am
|
|
That crack is 360 degrees ... around the top, sides and bottom ... one continuous "line" which bisects the bridge/string through holes ...
My guess it that it was dropped and broke ... then glued back together ...
So far I've salvaged this B6, a Ricky SW6, a Ricky S100 and a ShoBud JB frypan with these units ... all were train wrecks that I bought ... I'm a sucker for abused and abandoned instruments |
|
|
|
Rick Aiello
From:
Berryville, VA USA
|
Posted 8 Mar 2024 9:15 am
|
|
 |
|
|
|
Gary Meixner
From:
New York, USA
|
Posted 8 Mar 2024 9:29 am
|
|
Rick,
Excellent on all accounts.
What is meant by a "cutaway neck"?
As repair medium you might consider resorcinol adhesive. It is not easy to find anymore but it is a phenol/formaldehyde and very similar to the resin used to make Bakelite.
I used to work for an epoxy formulator and have some experience with it as a repair medium. There are many formulations that will work most of the readily products are not ideal.
Gary Meixner |
|
|
|
Rick Aiello
From:
Berryville, VA USA
|
Posted 8 Mar 2024 10:28 am
|
|
Cutaway neck ...
Straight neck ...
 |
|
|
|
Jim Mckay
From:
New Zealand
|
Posted 8 Mar 2024 11:52 am
|
|
Very nice Rick. Both instrument and playing. 
_________________
Canopus d-8
Excel Jerry Byrd frypan
T-8 Stringmaster |
|
|
|
David Matzenik
From:
Cairns, on the Coral Sea
|
Posted 8 Mar 2024 12:53 pm
|
|
Great sound! What is the serial number? Mine is C863.
_________________
Don't go in the water after lunch. You'll get a cramp and drown. - Mother. |
|
|
|
Rick Aiello
From:
Berryville, VA USA
|
Posted 8 Mar 2024 2:32 pm
|
|
It's a C followed by three numbers ... I can't tell what they are 🧐
 |
|
|
|
Scott Thomas
|
Posted 8 Mar 2024 7:04 pm
|
|
| I’m mesmerized by by the clarity and separation and your playing in that sample. Truly among the most beautiful I’ve heard. I’ve replayed the part at about 1:05 an over and over because I can’t wrap my mind around that sustained slide in note ringing as the next passage starts. Really uncanny, as is your vibrato which never fails to floor me. |
|
|
|
Joe A. Roberts
From:
Seoul, South Korea
|
Posted 8 Mar 2024 7:56 pm
|
|
| Great playing, and that black wrinkle finish on the metal hardware is awesome! |
|
|
|
Rick Aiello
From:
Berryville, VA USA
|
Posted 9 Mar 2024 3:00 am
|
|
| Gentleman, thank you very much |
|
|
|
Michael B Scott
From:
Orlando Florida, USA
|
Posted 13 May 2024 8:04 am
|
|
| The champion “Steel Saver” and our Horseshoe Hero |
|
|
|
BJ Burbach
From:
New York, USA
|
Posted 13 May 2024 3:09 pm
|
|
Great sound and playing.
BJ |
|
|
|
Jack Hanson
From:
San Luis Valley, USA
|
Posted 13 May 2024 6:32 pm
|
|
| Rick Aiello wrote: |
It's a C followed by three numbers ... I can't tell what they are 🧐
|
Wonder if it was stamped on a Monday morning or a Friday afternoon... |
|
|
|
